1PN (PN Mud Pump) Parts Listtotal 23 items, 20 part codes, including Impeller 2# (1PN-002) , Liner Plate 2# (1PN-003) , Pump Casing 2# (1PN-001) , Open Gland (1PN-009) , Shaft Sleeve (1PN-007) , Shaft (1PN-005) etc.; look up the material, unit weight and all fitting models of a part.
It belongs to Mud / Rubber-lined / Sand & Ash Pumps. The table below lists all its parts from the factory parts book; the first items usually replaced are Impeller 2# (1PN-002) , Liner Plate 2# (1PN-003) , Pump Casing 2# (1PN-001) , Open Gland (1PN-009) .
The table below lists all parts of this model — part name, part code, material/spec, unit weight and unit. Click a part code to see its materials and every model it fits.
| Part Name | Part Code | Material / Spec | Unit Wt. | Unit |
|---|---|---|---|---|
| 40Bearing Housing | — | HT200 | 10 | pc |
| 40Bearing Cover | — | HT200 | 1.5 | pc |
| Oil Seal | 40X62X12 | NBR | — | pc |
| Pump Casing 2# | 1PN-001 | KmTBMn5W3 | 14.5 | pc |
| Impeller 2# | 1PN-002 | KmTBMn5W3 | 3.29 | pc |
| Liner Plate 2# | 1PN-003 | KmTBMn5W3 | 5.1 | pc |
| Shaft | 1PN-005 | 45 | 6.98 | pc |
| Shaft Sleeve | 1PN-007 | HT200 | 1.68 | pc |
| Suction Pipe | 1PN-004 | HT150 | 4.2 | pc |
| Base | 1PN-Y100L2-4 | HT150 | 55 | pc |
| Base(60Hz export version) | 1PN-Y132S-4 | HT150 | 58 | pc |
| Shaft-seal Body | 1PN-006 | HT150 | 19.5 | pc |
| Open Gland | 1PN-009 | HT150 | 0.5 | pc |
| Packing Compression Ring | 1PN-010 | HT150 | 0.28 | pc |
| Seal-water Pipe 3/8" | 1PN-011 | A3.A3F | 0.08 | pc |
| Rubber Ring | 1PN-13 | Natural Rubber | — | pc |
| Rubber Ring | 1PN-15 | Natural Rubber | — | pc |
| Rubber Washer | 1PN-12 | Natural Rubber | — | pc |
| Rubber Washer | 1PN-14 | Natural Rubber | — | pc |
| Pump Coupling Half 25 | SBB005-95-1 | HT200 | 1.6 | pc |
| Motor Coupling Half 28 | SBB005A-95-02 | HT200 | 2.2 | pc |
| Motor Coupling Half 38 | SBB005A-95-02 | HT200 | 2.2 | pc |
| Elastic Washer | SBB0050 | Natural Rubber | — | pc |
Weights are for reference onlyUnit weight varies with material, batch and minor structural changes, For reference only — actual weight per drawing and factory weighing. For exact weights call 13930163303 (WeChat same number) to verify.
Part codes of this model grouped by part name; click any code to see the models it fits.
Send “pump model + part code + material + quantity” for a fast quote. Even a single old part or a nameplate photo is enough — we will identify the part number from the parts book. Common wear parts (impeller, liner, throat bush, frame plate liner, shaft sleeve, stuffing box, expeller cover, expeller) are kept in stock.