General description of cantilever horizontal centrifugal slurry pumps: scope of application and type classification (heavy-duty AH/HH/M/H, light-duty L, gravel G/D, rubber-lined AHR/LR/MR); structure of the three sections, namely pump head, shaft seal (expeller/packing) and drive; assembly essentials (bearing axial gap and grease quantity tables); operation and shutdown procedures; impeller clearance adjustment; the lubrication interval table; and remedies for 6 types of common faults.
fits: AH, AHP, HP, HH, H, M, L, LR, MR, AHR, D, G horizontal slurry pumps
Common to AH / HH / M / L / G Series6 chapters10 figures7 data tablesapprox. 6.2k characters
Description of the vertical sump slurry pump: SP metal and SPR rubber-lined wetted-part configurations; casing/support/bearing housing structure and submergence depth requirements; flush water pressure and flow rate table for the guide bearings of the extended shaft series; face clearance table for each bearing assembly; assembly and installation essentials; startup/operation/shutdown procedures; impeller clearance adjustment; bearing lubrication quantities; and handling of common faults.
fits: 40PV-SP, 65QV-SP, 100RV-SP, 150SV-SP, 200SV-SP, 250TV-SP, 300TV-SP and (L) extended shaft, SPR rubber-lined series
SP(R) Vertical Sump Slurry Pump6 chapters8 figures6 data tablesapprox. 3.4k characters
Manual for the heavy-duty slurry pumps dedicated to power plant ash handling duties: model designation (each field of 100ZGB(P)), double casing structure and installation with rotatable discharge at 45° intervals, selection between the two shaft seal types (expeller-plus-packing combination seal and mechanical seal), parameter tables of shaft seal water flow/connections/frame cooling water for each pump model, thin-oil lubricated frames and bearing clearance adjustment, 8-step mechanical seal installation procedure, multi-stage series start-up sequence, and troubleshooting.
fits: Full 65ZGB~300ZGB range (incl. 406/565/743 frames, A-type, and multi-stage series ZGB-P)
ZGB / ZG Series Slurry Pumps6 chapters4 figures3 data tablesapprox. 4.9k characters
Manual for high-efficiency, energy-saving, abrasion-resistant slurry pumps: maximum permissible conveyed concentration (45% for ash slurry / coal slurry, 60% for ore slurry), ZJ and ZJL types and the meaning of the model designations, lifting / installation / alignment (coupling 0.10 mm, dial indicator 0.15 mm) / piping configuration, shaft-seal water, cooling water and packing filling requirements, start-up procedures for single-stage pumps and pumps in series, impeller-to-throat-bush clearance adjustment procedure (0.75-1.00 mm), maintenance, and the wear parts list.
fits: ZJ horizontal (80ZJ-400ZJ etc.) and ZJL vertical slurry pumps, including cartridge frames such as T200ZJ
ZJ / ZJL Series Slurry Pumps6 chapters14 figuresapprox. 9.2k characters