80ZGB (ZGB Slurry Pump) Parts Listtotal 38 items, 37 part codes, including ImpellerA05 D=485(Standard) (80ZGB-01) , ExpellerA05 (100ZGB-05) , LinerA05 (80ZGB-02) , Throat BushA05 (80ZGB-03) , Frame Plate LinerA05 (80ZGB-04) , Pump Casing (80ZGB-05) etc.; look up the material, unit weight and all fitting models of a part.
It belongs to ZGB / ZG Series Slurry Pumps. The table below lists all its parts from the factory parts book; the first items usually replaced are ImpellerA05 D=485(Standard) (80ZGB-01) , ExpellerA05 (100ZGB-05) , LinerA05 (80ZGB-02) , Throat BushA05 (80ZGB-03) .
The table below lists all parts of this model — part name, part code, material/spec, unit weight and unit. Click a part code to see its materials and every model it fits.
| Part Name | Part Code | Material / Spec | Unit Wt. | Unit |
|---|---|---|---|---|
| O-ring | F064 | NBR | — | pc |
| O-ring | E109 | NBR | 1.88 | pc |
| Shaft Sleeve | E075 | 3Cr13 | 10.44 | pc |
| Shaft Sleeve(Ceramic) | E075 | 25 | 10.44 | pc |
| Lantern Ring | E063 | 1Cr18Ni9Ti | 2.87 | pc |
| Split Gland | E044 | HT200 | 3.8 | pc |
| Suction Gasket | EH3060 | Natural Rubber | — | pc |
| Pump Casing | 80ZGB-05 | HT200 | 166 | pc |
| Pump Cover | 80ZGB-06 | HT200 | 157 | pc |
| ImpellerA05 D=485(Standard) | 80ZGB-01 | KmTBCr26 | 82 | pc |
| LinerA05 | 80ZGB-02 | KmTBCr26 | 128 | pc |
| Throat BushA05 | 80ZGB-03 | KmTBCr26 | 75 | pc |
| Frame Plate LinerA05 | 80ZGB-04 | KmTBCr26 | 68 | pc |
| Shaft | 80ZGB-10 | 45 | 207.1 | pc |
| Inlet Pipe | 80ZGB-08 | ZG230-450 | 32 | pc |
| Outlet Pipe | 80ZGB-09 | ZG230-450 | 34.5 | pc |
| ExpellerA05 | 100ZGB-05 | KmTBCr26 | 32 | pc |
| Expeller CoverA05 | 100ZGB-06 | KmTBCr26 | 42 | pc |
| Fixing Plate | 100ZGB-13 | 20 | 0.32 | pc |
| Cover Stud | 100ZGB-12 | 45 | 6.2 | pc |
| Frame Body | SBB007-406-01 | HT200 | 329 | pc |
| Frame Cover | SBB007-406-02 | HT200 | 81.6 | pc |
| Dust Disc | SBB007-406-03 | HT200 | 5 | pc |
| Front Bearing Cover | SBB007-406-04 | HT150 | 7.77 | pc |
| Oil Slinger Disc | SBB007-406-05 | HT150 | 9.52 | pc |
| Oil Ring | SBB007-406-06 | A3.A3F | 1.3 | pc |
| Adjusting Nut A | SBB007-406-07 | 45 | 10.56 | pc |
| Adjustment Cover | SBB007-406-08 | HT150 | 1.47 | pc |
| Rear Bearing Cover | SBB007-406-09 | HT150 | 14.9 | pc |
| Adjusting Nut B | SBB007-406-10 | 45 | 8.32 | pc |
| Washer | SBB007-406-11 | HT150 | 3.8 | pc |
| Long Sleeve | SBB007-406-12 | HT200 | 2.8 | pc |
| Water-cooled Gland | SBB007-406-13 | HT150 | 6.39 | pc |
| Oil-inlet Washer | SBB007-406-14 | HT150 | 2.73 | pc |
| Removal Washer | SBB007-406-15 | A3.A3F | 8.01 | pc |
| Cooling-chamber Cover | SBB007-406-16 | ZG230-450 | 7.05 | pc |
| Gland BoltM16X55 | SBB047-82 | 45 | 0.27 | pc |
| Casing BoltM24X260 | SBB052-82 | 45 | 1.93 | pc |
Weights are for reference onlyUnit weight varies with material, batch and minor structural changes, For reference only — actual weight per drawing and factory weighing. For exact weights call 13930163303 (WeChat same number) to verify.
Part codes of this model grouped by part name; click any code to see the models it fits.
This model (ZGB / ZG Series Slurry Pumps) has a complete manual: structural drawings, assembly procedures, installation and alignment, operation and maintenance, parameter tables and troubleshooting.
Send “pump model + part code + material + quantity” for a fast quote. Even a single old part or a nameplate photo is enough — we will identify the part number from the parts book. Common wear parts (impeller, liner, throat bush, frame plate liner, shaft sleeve, stuffing box, expeller cover, expeller) are kept in stock.