1.5/1C-HH (HH High-head Slurry Pump) Parts Listtotal 37 items, 37 part codes, including ImpellerA05 (CH1127NA) , Expeller (CH028) , LinerA05 (CH1110NA) , Frame Plate LinerA05 (CH1041NA) , Pump CasingQT (CH1032) , Cover Stud (C015M) etc.; look up the material, unit weight and all fitting models of a part.
It belongs to HH High-head Slurry Pump. The table below lists all its parts from the factory parts book; the first items usually replaced are ImpellerA05 (CH1127NA) , Expeller (CH028) , LinerA05 (CH1110NA) , Frame Plate LinerA05 (CH1041NA) .
Within a series, larger suction/discharge sizes generally mean higher flow, head and max particle size. The table lists models of this series with collected clean-water performance (parts-only models and frame variants are in the “Same-series Models” tags at the page bottom), so you can move up or down the range; click “Details” for the full parts list.
| models | Flow m³/h | Head m | Speed r/min | Rated Power kW | Particle Size mm | Action |
|---|---|---|---|---|---|---|
| 1.5/1C-HH | 16.2-34.2 | 25-92 | 1400-2200 | 30 | 15 mm | This page |
| 3/2D-HH | 68.4-136.8 | 25-87 | 850-1400 | 60 | 20 mm | Details |
| 4/3E-HH | 126-252 | 12-97 | 600-1400 | 120 | 28 mm | Details |
| 6/4F-HH | 324-720 | 30-118 | 600-1000 | 260 | 45 mm | Details |
| 6/4S-HH | 324-720 | 30-118 | 600-1000 | 560 | 45 mm | Details |
| 8/6S-HH | 468-1008 | 20-94 | 500-1000 | 560 | 60 mm | Details |
The table below lists all parts of this model — part name, part code, material/spec, unit weight and unit. Click a part code to see its materials and every model it fits.
| Part Name | Part Code | Material / Spec | Unit Wt. | Unit |
|---|---|---|---|---|
| Discharge Gasket | B1132XLP | Natural Rubber | — | pc |
| frame | C003M | HT200 | 45 | pc |
| Cover Stud | C015M | 45 | 1.47 | pc |
| Pump CasingQT | CH1032 | QT500-7 | 50 | pc |
| Pump CoverQT | CH1013 | QT500-7 | 49.5 | pc |
| Front Lantern Ring | CH118 | 1Cr18Ni9Ti | 1.56 | pc |
| ImpellerA05 | CH1127NA | KmTBCr26 | 16 | pc |
| LinerA05 | CH1110NA | KmTBCr26 | 41 | pc |
| Frame Plate LinerA05 | CH1041NA | KmTBCr26 | 16 | pc |
| Long Sleeve | CH076 | 4Cr13 | 4.7 | pc |
| Short Sleeve | CH075 | 4Cr13 | 3.46 | pc |
| Oil-cup Seat | D138 | 20 | 0.29 | pc |
| Stuffing Box | CH078 | HT200 | 18 | pc |
| Expeller | CH028 | HT200 | 2.5 | pc |
| Expeller Cover | CH029 | HT200 | 16 | pc |
| Lantern Ring | CH063 | 1Cr18Ni9Ti | 1.24 | pc |
| Packing Washer | CH067 | 1Cr18Ni9Ti | 0.41 | pc |
| Split Gland | CH044 | HT200 | 1 | pc |
| Locating Washer | C080 | 20 | 0.14 | pc |
| O-ring | CH109 | NBR | — | pc |
| Suction Gasket | CH1060 | Natural Rubber | — | pc |
| Liner Gasket | CH1125 | Natural Rubber | — | pc |
| Seal Gasket | CH122 | Natural Rubber | — | pc |
| Bearing Body | C004M | HT200 | 21 | pc |
| Shaft | CAM073M | 45 | 19.46 | pc |
| End Cover | C024 | HT200 | 2.8 | pc |
| Grease Guard Ring | C046 | HT200 | 0.8 | pc |
| Labyrinth Sleeve | C062 | HT200 | 1.7 | pc |
| BSW Round NutC061 | SBB046-82 | 45 | 0.49 | pc |
| Gland BoltM10X40 | SBB047-82 | 45 | 0.19 | pc |
| Lock WasherC011 | SBB048-82 | 45 | 0.33 | pc |
| Adjusting BoltM16X150 | SBB049-82 | 45 | 0.51 | pc |
| Casing StudM16X180 | SBB052-82 | 45 | 0.53 | pc |
| Square-head ScrewM12X110 | SBB054-82 | 45 | 0.26 | pc |
| Key12X95 | SBB063-82 | 45 | 0.17 | pc |
| Bearing Assembly | CAM005M | — | — | pc |
| Stuffing Box (high-seal) | CH078HS1 | D21 / A05 / G01 / C23 | — | pc |
Weights are for reference onlyUnit weight varies with material, batch and minor structural changes, For reference only — actual weight per drawing and factory weighing. For exact weights call 13930163303 (WeChat same number) to verify.
Part codes of this model grouped by part name; click any code to see the models it fits.
| Pump Model | 1.5/1C-HH |
|---|---|
| Category | Slurry Pumps |
| Series | HH High-head Slurry Pump |
| Rated Power | 30 kW |
| Flow | 16.2-34.2 m³/h (4.9-9.5 L/s) |
| Head | 25-92 m |
| Speed | 1400-2200 r/min |
| Peak Efficiency | 20 % |
| NPSH | 2-5.5 m |
| Blades | 5 |
| Impeller Dia. | 330 mm |
| Max. Particle Size | 15 mm |
| Wet-end Material | High-chrome A05 (A07/A33/A49 optional) |
| Drive | CRZ, CV, DCZ, ZVZ |
| Shaft Seal | Gland packing, expeller seal, mechanical seal |
| Model Nomenclature | 3/2D-HH: suction 3 in, discharge 2 in, D frame, HH seriesHigh-head Slurry Pumps. |
This model (Common to AH / HH / M / L / G Series) has a complete manual: structural drawings, assembly procedures, installation and alignment, operation and maintenance, parameter tables and troubleshooting.
Send “pump model + part code + material + quantity” for a fast quote. Even a single old part or a nameplate photo is enough — we will identify the part number from the parts book. Common wear parts (impeller, liner, throat bush, frame plate liner, shaft sleeve, stuffing box, expeller cover, expeller) are kept in stock.