6/4F-HH (HH High-head Slurry Pump) Parts Listtotal 41 items, 41 part codes, including ImpellerA05 (FH4147NA) , Expeller (FH028) , LinerA05 (FH4110) , Throat BushA05 (FH4083) , Frame Plate LinerA05 (FH4041) , Pump CasingQT (FH4032) etc.; look up the material, unit weight and all fitting models of a part.
It belongs to HH High-head Slurry Pump. The table below lists all its parts from the factory parts book; the first items usually replaced are ImpellerA05 (FH4147NA) , Expeller (FH028) , LinerA05 (FH4110) , Throat BushA05 (FH4083) .
Within a series, larger suction/discharge sizes generally mean higher flow, head and max particle size. The table lists models of this series with collected clean-water performance (parts-only models and frame variants are in the “Same-series Models” tags at the page bottom), so you can move up or down the range; click “Details” for the full parts list.
| models | Flow m³/h | Head m | Speed r/min | Rated Power kW | Particle Size mm | Action |
|---|---|---|---|---|---|---|
| 1.5/1C-HH | 16.2-34.2 | 25-92 | 1400-2200 | 30 | 15 mm | Details |
| 3/2D-HH | 68.4-136.8 | 25-87 | 850-1400 | 60 | 20 mm | Details |
| 4/3E-HH | 126-252 | 12-97 | 600-1400 | 120 | 28 mm | Details |
| 6/4F-HH | 324-720 | 30-118 | 600-1000 | 260 | 45 mm | This page |
| 6/4S-HH | 324-720 | 30-118 | 600-1000 | 560 | 45 mm | Details |
| 8/6S-HH | 468-1008 | 20-94 | 500-1000 | 560 | 60 mm | Details |
The table below lists all parts of this model — part name, part code, material/spec, unit weight and unit. Click a part code to see its materials and every model it fits.
| Part Name | Part Code | Material / Spec | Unit Wt. | Unit |
|---|---|---|---|---|
| Oil-cup Seat | D138 | 20 | 0.29 | pc |
| O-ring | F109 | NBR | — | pc |
| Pump CasingQT | FH4032 | QT500-7 | 488 | pc |
| Pump CoverQT | FH4013 | QT500-7 | 483 | pc |
| ImpellerA05 | FH4147NA | KmTBCr26 | 296.5 | pc |
| LinerA05 | FH4110 | KmTBCr26 | 275 | pc |
| Sleeve Washer | FG179 | CS1 | 0.8 | pc |
| Clamp | F315 | HT200 | 3.2 | pc |
| Reinforcing Ring | ESY7024-1 | A3.A3F | 1.24 | pc |
| O-ring | FH122 | NBR | — | pc |
| Suction Gasket | FH4060 | Natural Rubber | — | pc |
| Discharge Gasket | E4132H | Natural Rubber | — | pc |
| frame | F003M | HT200 | 546 | pc |
| Front Lantern Ring | F118 | 1Cr18Ni9Ti | 7.86 | pc |
| Throat BushA05 | FH4083 | KmTBCr26 | 171 | pc |
| Frame Plate LinerA05 | FH4041 | KmTBCr26 | 141 | pc |
| Shaft Sleeve | F075 | CS1 | 9 | pc |
| Locating Sleeve | FG117 | CS1 | 4 | pc |
| Stuffing Box | FH078 | HT200 | 86 | pc |
| Expeller | FH028 | HT200 | 39 | pc |
| Expeller Cover | FH029 | HT200 | 82.5 | pc |
| Lantern Ring | F063 | 1Cr18Ni9Ti | 4.95 | pc |
| Packing Washer | F067 | 1Cr18Ni9Ti | 1.4 | pc |
| Split Gland | F044 | HT200 | 5.5 | pc |
| Spigot Washer | F080-1 | 20 | 0.37 | pc |
| Liner Gasket | G8124 | Natural Rubber | — | pc |
| Cover Stud | G8015M | 45 | 8.53 | pc |
| Bearing Body | F004M | HT200 | 93 | pc |
| Shaft | FG073M | 45 | 153.54 | pc |
| End Cover | F024-10 | HT200 | 10 | pc |
| Grease Guard Ring | F046 | HT200 | 5.5 | pc |
| Labyrinth Sleeve | F062-10 | QT500-7 | 4.8 | pc |
| BSW Round NutF061 | SBB046-82 | 45 | 1.67 | pc |
| Gland BoltM20X75 | SBB047-82 | 45 | 0.47 | pc |
| Lock WasherF011 | SBB048-82 | 45 | 1.4 | pc |
| Adjusting BoltM30X305 | SBB049-82 | 45 | 3.11 | pc |
| Casing StudM30X345 | SBB052-82 | 45 | 3.97 | pc |
| Key28X215 | SBB063-82 | 45 | 1.38 | pc |
| Bearing Assembly | FG005M | — | — | pc |
| Bearing Assembly | FAM005M | — | — | pc |
| Stuffing Box (high-seal) | FH078HS1 | D21 / A05 / G01 / C23 | — | pc |
Weights are for reference onlyUnit weight varies with material, batch and minor structural changes, For reference only — actual weight per drawing and factory weighing. For exact weights call 13930163303 (WeChat same number) to verify.
Part codes of this model grouped by part name; click any code to see the models it fits.
| Pump Model | 6/4F-HH |
|---|---|
| Category | Slurry Pumps |
| Series | HH High-head Slurry Pump |
| Rated Power | 260 kW |
| Flow | 324-720 m³/h (90-200 L/s) |
| Head | 30-118 m |
| Speed | 600-1000 r/min |
| Peak Efficiency | 64 % |
| NPSH | 3-8 m |
| Blades | 5 |
| Impeller Dia. | 711 mm |
| Max. Particle Size | 45 mm |
| Wet-end Material | High-chrome A05 (A07/A33/A49 optional) |
| Drive | CRZ, CV, DCZ, ZVZ |
| Shaft Seal | Gland packing, expeller seal, mechanical seal |
| Model Nomenclature | 3/2D-HH: suction 3 in, discharge 2 in, D frame, HH seriesHigh-head Slurry Pumps. |
This model (Common to AH / HH / M / L / G Series) has a complete manual: structural drawings, assembly procedures, installation and alignment, operation and maintenance, parameter tables and troubleshooting.
Send “pump model + part code + material + quantity” for a fast quote. Even a single old part or a nameplate photo is enough — we will identify the part number from the parts book. Common wear parts (impeller, liner, throat bush, frame plate liner, shaft sleeve, stuffing box, expeller cover, expeller) are kept in stock.