6/4X-SH (SH Slurry Pump) Parts Listtotal 30 items, 30 part codes, including ImpellerQT D=589(Standard) (ESH4145) , Pump CasingQT (ESH4092M) , Pump CoverQT (ESH4013) , Split Gland (E044) , Gland BoltM16X55 (SBB047-82) , Shaft Sleeve (E075) etc.; look up the material, unit weight and all fitting models of a part.
It belongs to H / SH Series Slurry Pumps. The table below lists all its parts from the factory parts book; the first items usually replaced are ImpellerQT D=589(Standard) (ESH4145) , Pump CasingQT (ESH4092M) , Pump CoverQT (ESH4013) , Split Gland (E044) .
By the numbering rule “suction size / discharge size + frame letter + series” it reads: suction 6 in, discharge 4 in, X frame, SH series. The frame letter indicates the bearing frame size — the later the letter (C→D→E→F→S/T), the higher the power capacity; double letters (CC, DD, EE, FF) are reinforced frames of the same tier.This model and its part codes are compiled from the official part-code cross-reference; clean-water performance parameters are not yet collected.For flow / head / speed / motor data please contact us directly.
The table below lists all parts of this model — part name, part code, material/spec, unit weight and unit. Click a part code to see its materials and every model it fits.
| Part Name | Part Code | Material / Spec | Unit Wt. | Unit |
|---|---|---|---|---|
| O-ring | F064 | NBR | — | pc |
| O-ring | E109 | NBR | 1.88 | pc |
| Shaft Sleeve | E075 | 3Cr13 | 10.44 | pc |
| Locating Sleeve | EAM117 | 4Cr13 | 6.02 | pc |
| Lantern Ring | E063 | 1Cr18Ni9Ti | 2.87 | pc |
| Packing Washer | E067 | 1Cr18Ni9Ti | 0.96 | pc |
| Split Gland | E044 | HT200 | 3.8 | pc |
| Pump CasingQT | ESH4092M | QT500-7 | 275 | pc |
| Pump CoverQT | ESH4013 | QT500-7 | 155 | pc |
| ImpellerQT D=589(Standard) | ESH4145 | QT500-7 | 99 | pc |
| Shaft | 6/4X-SH-01 | 45 | 209.38 | pc |
| Frame Body | SBB007-406-01 | HT200 | 329 | pc |
| Frame Cover | SBB007-406-02 | HT200 | 81.6 | pc |
| Dust Disc | SBB007-406-03 | HT200 | 5 | pc |
| Front Bearing Cover | SBB007-406-04 | HT150 | 7.77 | pc |
| Oil Slinger Disc | SBB007-406-05 | HT150 | 9.52 | pc |
| Oil Ring | SBB007-406-06 | A3.A3F | 1.3 | pc |
| Adjusting Nut A | SBB007-406-07 | 45 | 10.56 | pc |
| Adjustment Cover | SBB007-406-08 | HT150 | 1.47 | pc |
| Rear Bearing Cover | SBB007-406-09 | HT150 | 14.9 | pc |
| Adjusting Nut B | SBB007-406-10 | 45 | 8.32 | pc |
| Washer | SBB007-406-11 | HT150 | 3.8 | pc |
| Long Sleeve | SBB007-406-12 | HT200 | 2.8 | pc |
| Water-cooled Gland | SBB007-406-13 | HT150 | 6.39 | pc |
| Oil-inlet Washer | SBB007-406-14 | HT150 | 2.73 | pc |
| Removal Washer | SBB007-406-15 | A3.A3F | 8.01 | pc |
| Cooling-chamber Cover | SBB007-406-16 | ZG230-450 | 7.05 | pc |
| StudM24X64 | SBB033-82-17 | 45 | 0.44 | pc |
| Gland BoltM16X55 | SBB047-82 | 45 | 0.27 | pc |
| Casing BoltM24X260 | SBB052-82 | 45 | 1.93 | pc |
Weights are for reference onlyUnit weight varies with material, batch and minor structural changes, For reference only — actual weight per drawing and factory weighing. For exact weights call 13930163303 (WeChat same number) to verify.
Part codes of this model grouped by part name; click any code to see the models it fits.
Send “pump model + part code + material + quantity” for a fast quote. Even a single old part or a nameplate photo is enough — we will identify the part number from the parts book. Common wear parts (impeller, liner, throat bush, frame plate liner, shaft sleeve, stuffing box, expeller cover, expeller) are kept in stock.