8/6F-SH (SH Slurry Pump) Parts Listtotal 25 items, 25 part codes, including ImpellerQT (FSH6145-1) , Pump CasingQT (FSH6092M) , Pump CoverQT (FSH6013) , Split Gland (F044) , Gland BoltM20X75 (SBB047-82) , Shaft Sleeve (FG076) etc.; look up the material, unit weight and all fitting models of a part.
It belongs to H / SH Series Slurry Pumps. The table below lists all its parts from the factory parts book; the first items usually replaced are ImpellerQT (FSH6145-1) , Pump CasingQT (FSH6092M) , Pump CoverQT (FSH6013) , Split Gland (F044) .
By the numbering rule “suction size / discharge size + frame letter + series” it reads: suction 8 in, discharge 6 in, F frame, SH series. The frame letter indicates the bearing frame size — the later the letter (C→D→E→F→S/T), the higher the power capacity; double letters (CC, DD, EE, FF) are reinforced frames of the same tier.This model and its part codes are compiled from the official part-code cross-reference; clean-water performance parameters are not yet collected.For flow / head / speed / motor data please contact us directly.
The table below lists all parts of this model — part name, part code, material/spec, unit weight and unit. Click a part code to see its materials and every model it fits.
| Part Name | Part Code | Material / Spec | Unit Wt. | Unit |
|---|---|---|---|---|
| O-ring | F109 | NBR | — | pc |
| frame | F003M | HT200 | 546 | pc |
| Labyrinth Ring | F108 | HT200 | — | pc |
| Pump CasingQT | FSH6092M | QT500-7 | 857 | pc |
| Pump CasingQT(mech-seal type) | FSH6092M-JM | QT500-7 | 713 | pc |
| Pump CoverQT | FSH6013 | QT500-7 | 480 | pc |
| ImpellerQT | FSH6145-1 | QT500-7 | 243.5 | pc |
| Shaft Sleeve | FG076 | CS1 | 12.5 | pc |
| Impeller Removal Ring | FG239-1M | CS1 | 2.7 | pc |
| Lantern Ring | F063 | 1C18Ni9Ti | 4.95 | pc |
| Packing Washer | F067 | 1C18Ni9Ti | 1.4 | pc |
| Split Gland | F044 | HT200 | 5.5 | pc |
| Bearing Body | F004M | HT200 | 93 | pc |
| End Cover | F024-10 | HT200 | 10 | pc |
| Grease Guard Ring | F046 | HT200 | 5.5 | pc |
| Labyrinth Sleeve | F062-10 | QT500-7 | 4.8 | pc |
| Shaft | FG073-2M | 45 | 142.64 | pc |
| Labyrinth Sleeve | FG062-10 | QT500-7 | 4.8 | pc |
| BSW Round NutF061 | SBB046-82 | 45 | 1.67 | pc |
| Gland BoltM20X75 | SBB047-82 | 45 | 0.47 | pc |
| Lock WasherF011 | SBB048-82 | 45 | 1.4 | pc |
| Adjusting BoltM30X305 | SBB049-82 | 45 | 3.11 | pc |
| Casing StudM30X325 | SBB052-82 | 45 | 3.76 | pc |
| Key28X215 | SBB063-82 | 45 | 1.38 | pc |
| Bearing Assembly | FG005-2M | — | — | pc |
Weights are for reference onlyUnit weight varies with material, batch and minor structural changes, For reference only — actual weight per drawing and factory weighing. For exact weights call 13930163303 (WeChat same number) to verify.
Part codes of this model grouped by part name; click any code to see the models it fits.
Send “pump model + part code + material + quantity” for a fast quote. Even a single old part or a nameplate photo is enough — we will identify the part number from the parts book. Common wear parts (impeller, liner, throat bush, frame plate liner, shaft sleeve, stuffing box, expeller cover, expeller) are kept in stock.