8/6X-SH (SH Slurry Pump) Parts Listtotal 29 items, 29 part codes, including ImpellerQT (FSH6145-1) , Pump CasingQT (FSH6092M) , Pump CoverQT (FSH6013) , Split Gland (F044) , Gland BoltM20X75 (SBB047-82) , Shaft Sleeve (FG076) etc.; look up the material, unit weight and all fitting models of a part.
It belongs to H / SH Series Slurry Pumps. The table below lists all its parts from the factory parts book; the first items usually replaced are ImpellerQT (FSH6145-1) , Pump CasingQT (FSH6092M) , Pump CoverQT (FSH6013) , Split Gland (F044) .
By the numbering rule “suction size / discharge size + frame letter + series” it reads: suction 8 in, discharge 6 in, X frame, SH series. The frame letter indicates the bearing frame size — the later the letter (C→D→E→F→S/T), the higher the power capacity; double letters (CC, DD, EE, FF) are reinforced frames of the same tier.This model and its part codes are compiled from the official part-code cross-reference; clean-water performance parameters are not yet collected.For flow / head / speed / motor data please contact us directly.
The table below lists all parts of this model — part name, part code, material/spec, unit weight and unit. Click a part code to see its materials and every model it fits.
| Part Name | Part Code | Material / Spec | Unit Wt. | Unit |
|---|---|---|---|---|
| O-ring | F109 | NBR | — | pc |
| Guard Sleeve | 6/4X-HH-01 | CS1 | 4.12 | pc |
| Pump CasingQT | FSH6092M | QT500-7 | 857 | pc |
| Pump CoverQT | FSH6013 | QT500-7 | 480 | pc |
| ImpellerQT | FSH6145-1 | QT500-7 | 243.5 | pc |
| Shaft Sleeve | FG076 | CS1 | 12.5 | pc |
| Shaft | 8/6X-SH-01 | 45 | 412.8 | pc |
| Lantern Ring | F063 | 1C18Ni9Ti | 4.95 | pc |
| Packing Washer | F067 | 1C18Ni9Ti | 1.4 | pc |
| Split Gland | F044 | HT200 | 5.5 | pc |
| Impeller Removal Ring | S239M | CS1 | 8.2 | pc |
| frame | SBB007-565-01 | HT200 | 612.7 | pc |
| Frame Cover | SBB007-565-02 | HT200 | 132.6 | pc |
| Dust Disc | SBB007-565-03 | HT200 | 9.7 | pc |
| Front Bearing Cover | SBB007-565-04 | HT150 | 17 | pc |
| Oil Slinger Disc | SBB007-565-05 | HT150 | 12.85 | pc |
| Oil Ring | SBB007-565-06 | A3.A3F | 9.13 | pc |
| Adjusting Nut A | SBB007-565-07 | 45 | 18.06 | pc |
| Adjustment Cover | SBB007-565-08 | HT150 | 2.6 | pc |
| Rear Bearing Cover | SBB007-565-09 | HT150 | 18.7 | pc |
| Adjusting Nut B | SBB007-565-10 | 45 | 13.08 | pc |
| Washer | SBB007-565-11 | HT150 | 4.41 | pc |
| Long Sleeve | SBB007-565-12 | HT200 | 6.4 | pc |
| Water-cooled Gland | SBB007-565-13 | HT150 | 7 | pc |
| Oil-inlet Washer | SBB007-565-14 | HT150 | 7.5 | pc |
| Removal Washer | SBB007-565-15 | A3.A3F | 7.28 | pc |
| Cooling-chamber CoverB | SBB007-760-06 | ZG230-450 | 14.5 | pc |
| Gland BoltM20X75 | SBB047-82 | 45 | 0.47 | pc |
| Casing StudM30X330 | SBB052-82 | 45 | 3.82 | pc |
Weights are for reference onlyUnit weight varies with material, batch and minor structural changes, For reference only — actual weight per drawing and factory weighing. For exact weights call 13930163303 (WeChat same number) to verify.
Part codes of this model grouped by part name; click any code to see the models it fits.
Send “pump model + part code + material + quantity” for a fast quote. Even a single old part or a nameplate photo is enough — we will identify the part number from the parts book. Common wear parts (impeller, liner, throat bush, frame plate liner, shaft sleeve, stuffing box, expeller cover, expeller) are kept in stock.