Name: 8/6E-G slurry pump parts
SKU: 8/6E-G

8/6E-G — what pump is it and how to read its parts?

It belongs to G(GH) Gravel & TBM Pumps. The table below lists all its parts from the factory parts book; the first items usually replaced are Expeller (E028) , Liner Gasket (E4142) , Frame Plate LinerA05 (E4041) , Frame Plate Liner (EG6041) .

To get a quote, just give us the pump model + part code + material + quantity, e.g. "8/6E-G E4147 A05 2 pc”.
A nameplate or a photo of the old part also works: 13930163303 (WeChat same number) or email sale@pumpq.com.
Confused by part names? See the glossary to understand “liner”, “expeller cover” and “A05”.

Same-series Comparison (G Gravel Pump) View all models of this type →

Within a series, larger suction/discharge sizes generally mean higher flow, head and max particle size. The table lists models of this series with collected clean-water performance (parts-only models and frame variants are in the “Same-series Models” tags at the page bottom), so you can move up or down the range; click “Details” for the full parts list.

models	Flow m³/h	Head m	Speed r/min	Rated Power kW	Particle Size mm	Action
6/4D-G	36-250	5-52	600-1400	60	82 mm	Details
6/4E-G	36-250	5-52	600-1400	110	82 mm	Details
8/6E-G	126-576	6-45	800-1400	120	100 mm	This page
10/8F-G	180-1440	24-30	500-950	260	120 mm	Details
10/8S-G	180-1440	24-30	500-950	560	120 mm	Details
12/10G-G	360-1440	10-60	400-850	600	150 mm	Details
14/12G-G	576-3024	8-70	300-700	1200	180 mm	Details
16/14G-G	720-3600	18-44	300-500	600	220 mm	Details
16/14TU-G	324-3600	26-70	300-500	1200	220 mm	Details
18/16TU-G	720-4320	12-48	250-500	1200	—	Details

Parameters are factory clean-water values; convert by slurry specific gravity and concentration for slurry duty.“—” = particle size not yet collected: rubber-lined (R / LR / SPR) models allow smaller particles than the metal version of the same size, and some large-bore models have no published data.Final selection is subject to the factory selection confirmation sheet.

8/6E-G Parts List (43 items)

The table below lists all parts of this model — part name, part code, material/spec, unit weight and unit. Click a part code to see its materials and every model it fits.

Part Name	Part Code	Material / Spec	Unit Wt.	Unit
Frame Plate LinerA05	E4041	KmTBCr26	31.6	pc
Seal Gasket	E122	Natural Rubber	—	pc
O-ring	F064	NBR	—	pc
Front Clamp Band	E6135	ZG230-450	40.26	pc
O-ring	EG6124	NBR	—	pc
Locating Sleeve	E117	4Cr13	4.21	pc
Stuffing Box	E078	HT200	19	pc
Expeller	E028	HT200	8.2	pc
Expeller Cover	E029	HT200	17.6	pc
O-ring	E109	NBR	1.88	pc
Shaft Sleeve	E075	3Cr13	10.44	pc
frame	E003M	HT200	154	pc
Lantern Ring	E063	1Cr18Ni9Ti	2.87	pc
Front Lantern Ring	E118	1Cr18Ni9Ti	4.08	pc
Packing Washer	E067	1Cr18Ni9Ti	0.95	pc
Split Gland	E044	HT200	3.8	pc
Pump CasingA05	EG6131	KmTBCr26	362	pc
Pump CoverA05	EG86013	KmTBCr26	91	pc
ImpellerA05	EG86137	KmTBCr26	74	pc
Rear Clamp Band	E134	25	11.48	pc
Joint PlateQT	EG6032M	QT500-7	110	pc
Split Discharge Flange	E6130	ZG230-450	10.5	pc
Discharge Gasket	E6132	Natural Rubber	—	pc
Liner Gasket	E4142	Natural Rubber	—	pc
Split Discharge Flange	F8130	25	42.26	pc
Discharge Gasket	F8132	Natural Rubber	—	pc
Bearing Body	E004M	HT200	58	pc
Shaft	E073M	45	66.76	pc
End Cover	E024	HT200	7	pc
Grease Guard Ring	E046	HT200	3.6	pc
Labyrinth Sleeve	E062	HT200	3.9	pc
BSW Round NutE061	SBB046-82	45	1.41	pc
Gland BoltM16X55	SBB047-82	45	0.27	pc
Lock WasherE011	SBB048-82	45	0.74	pc
Adjusting BoltM24X240	SBB049-82	45	1.51	pc
Casing StudM24X234	SBB052-82	45	1.23	pc
Square-head ScrewM16X110	SBB054-82	45	0.39	pc
KeyB22X185	SBB063-82	45	0.89	pc
BoltM24X230	SBB087-85	45	1.4	pc
Bearing Assembly	E005M	—	—	pc
Impeller	EG6137	A05 / A07 / A33 / A49	—	pc
Frame Plate Liner	EG6041	A05	—	pc
Bearing Assembly	EAM005M	—	—	pc

Weights are for reference onlyUnit weight varies with material, batch and minor structural changes, For reference only — actual weight per drawing and factory weighing. For exact weights call 13930163303 (WeChat same number) to verify.

Ordering: send “pump model 8/6E-G + part code + material" and we will confirm the quote; for non-listed non-standard parts, provide a drawing or photos and we will help identify them.

Quick Part Code Lookup

Part codes of this model grouped by part name; click any code to see the models it fits.

Performance Parameters

Pump Model	8/6E-G
Category	Slurry Pumps
Series	G Gravel Pump
Rated Power	120 kW
Flow	126-576 m³/h (35-160 L/s)
Head	6-45 m
Speed	800-1400 r/min
Peak Efficiency	60 %
NPSH	3-4.5 m
Blades	—
Impeller Dia.	378 mm
Max. Particle Size	100 mm
Wet-end Material	High-chrome A05 (A07/A33/A49 optional)
Drive	CRZ, CV, DCZ, ZVZ
Shaft Seal	Gland packing, expeller seal, mechanical seal
Model Nomenclature	6/4D-G: 6 insuction, 4 indischarge, D frame, G Gravel Pump.

AH, L, G Series Slurry Pump Manual

This model (Common to AH / HH / M / L / G Series) has a complete manual: structural drawings, assembly procedures, installation and alignment, operation and maintenance, parameter tables and troubleshooting.

Read Full Manual Download the original DOCX Request Stamped PDF

Same-series Models View all models of this type →

6/4D-G 10/8F-G 12/10G-G 14/12G-G 10/8S-G 6/4E-G 16/14G-G 16/14TU-G 18/16TU-G 14/12TU-G 14/12T-G 18/16T-G

8/6E-G Slurry Pump Parts List (43 items / 43 part codes)