14/12G-G (G Gravel Pump) Parts Listtotal 39 items, 38 part codes, including Impeller Removal Ring (G239-10M) , Throat BushA05 (GG1412013-1) , Frame Plate LinerA05 (GG12041) , Pump CasingA05 (GG12131) , Pump Cover (GG1412292) , Stuffing Box (G078) etc.; look up the material, unit weight and all fitting models of a part.
It belongs to G(GH) Gravel & TBM Pumps. The table below lists all its parts from the factory parts book; the first items usually replaced are Impeller Removal Ring (G239-10M) , Throat BushA05 (GG1412013-1) , Frame Plate LinerA05 (GG12041) , Pump CasingA05 (GG12131) .
Within a series, larger suction/discharge sizes generally mean higher flow, head and max particle size. The table lists models of this series with collected clean-water performance (parts-only models and frame variants are in the “Same-series Models” tags at the page bottom), so you can move up or down the range; click “Details” for the full parts list.
| models | Flow m³/h | Head m | Speed r/min | Rated Power kW | Particle Size mm | Action |
|---|---|---|---|---|---|---|
| 6/4D-G | 36-250 | 5-52 | 600-1400 | 60 | 82 mm | Details |
| 6/4E-G | 36-250 | 5-52 | 600-1400 | 110 | 82 mm | Details |
| 8/6E-G | 126-576 | 6-45 | 800-1400 | 120 | 100 mm | Details |
| 10/8F-G | 180-1440 | 24-30 | 500-950 | 260 | 120 mm | Details |
| 10/8S-G | 180-1440 | 24-30 | 500-950 | 560 | 120 mm | Details |
| 12/10G-G | 360-1440 | 10-60 | 400-850 | 600 | 150 mm | Details |
| 14/12G-G | 576-3024 | 8-70 | 300-700 | 1200 | 180 mm | This page |
| 16/14G-G | 720-3600 | 18-44 | 300-500 | 600 | 220 mm | Details |
| 16/14TU-G | 324-3600 | 26-70 | 300-500 | 1200 | 220 mm | Details |
| 18/16TU-G | 720-4320 | 12-48 | 250-500 | 1200 | — | Details |
The table below lists all parts of this model — part name, part code, material/spec, unit weight and unit. Click a part code to see its materials and every model it fits.
| Part Name | Part Code | Material / Spec | Unit Wt. | Unit |
|---|---|---|---|---|
| frameQT | G003M | QT500-7 | 1006 | pc |
| Clamp QT | G315 | QT500-7 | 3.2 | pc |
| Split Suction Flange | F12130 | 20 | 97.8 | pc |
| Impeller Removal Ring | G239-10M | CS1 | 9.7 | pc |
| Pump CasingA05 | GG12131 | KmTBCr26 | 1695 | pc |
| Pump Cover | GG1412292 | HT200 | 252 | pc |
| ImpellerA05 | GG12137 | KmTBCr26 | 712 | pc |
| Impeller(reverse)A05 | GG12137A | KmTBCr26 | 712 | pc |
| Throat BushA05 | GG1412013-1 | KmTBCr26 | 308.5 | pc |
| Frame Plate LinerA05 | GG12041 | KmTBCr26 | 372 | pc |
| Shaft Sleeve | G075 | CS1 | 19 | pc |
| Locating Sleeve | G117 | CS1 | 9 | pc |
| Clamp Band | G12135 | 25 | 73.52 | pc |
| Joint PlateQT | GG12032 | QT500-7 | 479 | pc |
| Split Suction Flange | F14130 | 20 | 62.87 | pc |
| Stuffing Box | G078 | HT200 | 121.5 | pc |
| Lantern Ring | G063 | ATNi14Cu6 | 4.97 | pc |
| Front Lantern Ring | G118 | ATNi14Cu6 | 9.93 | pc |
| Packing Washer | G067 | 1Cr18Ni9Ti | 3.6 | pc |
| Split Gland | G044 | HT200 | 12.5 | pc |
| O-ring | G122 | NBR | — | pc |
| O-ring | G109 | NBR | — | pc |
| O-ring | U18122 | NBR | — | pc |
| Bearing Body | G004M | QT500-7 | 295 | pc |
| End Cover | G024-10 | HT200 | 28 | pc |
| Grease Guard Ring | G046 | HT200 | 22.5 | pc |
| Labyrinth Sleeve (pump end) | G062-10 | HT200 | 21 | pc |
| Labyrinth Sleeve (drive end) | GAM062-10 | HT200 | 15 | pc |
| BSW Round Nut | G061Z | 45 | 7.82 | pc |
| Shaft | G073M | 45 | 453.56 | pc |
| ShaftG073MZ | G005MZ-01 | 45 | 453.56 | pc |
| BSW Round NutG061 | SBB046-82 | 45 | 7.82 | pc |
| Gland BoltM20X85 | SBB047-82 | 45 | 0.51 | pc |
| Lock WasherG011 | SBB048-82 | 45 | 2.48 | pc |
| Adjusting BoltM36X405 | SBB049-82 | 45 | 5.24 | pc |
| Casing BoltM42X430 | SBB051-82 | 45 | 8.34 | pc |
| BoltM30X345 | SBB087-85 | 45 | 3.4 | pc |
| Bearing Assembly | — | — | — | pc |
| Bearing Assembly | G005M | — | — | pc |
Weights are for reference onlyUnit weight varies with material, batch and minor structural changes, For reference only — actual weight per drawing and factory weighing. For exact weights call 13930163303 (WeChat same number) to verify.
Part codes of this model grouped by part name; click any code to see the models it fits.
| Pump Model | 14/12G-G |
|---|---|
| Category | Slurry Pumps |
| Series | G Gravel Pump |
| Rated Power | 1200 kW |
| Flow | 576-3024 m³/h (160-840 L/s) |
| Head | 8-70 m |
| Speed | 300-700 r/min |
| Peak Efficiency | 68 % |
| NPSH | 2.0-8.0 m |
| Blades | — |
| Impeller Dia. | 864 mm |
| Max. Particle Size | 180 mm |
| Wet-end Material | High-chrome A05 (A07/A33/A49 optional) |
| Drive | CRZ, CV, DCZ, ZVZ |
| Shaft Seal | Gland packing, expeller seal, mechanical seal |
| Model Nomenclature | 6/4D-G: 6 insuction, 4 indischarge, D frame, G Gravel Pump. |
This model (Common to AH / HH / M / L / G Series) has a complete manual: structural drawings, assembly procedures, installation and alignment, operation and maintenance, parameter tables and troubleshooting.
Send “pump model + part code + material + quantity” for a fast quote. Even a single old part or a nameplate photo is enough — we will identify the part number from the parts book. Common wear parts (impeller, liner, throat bush, frame plate liner, shaft sleeve, stuffing box, expeller cover, expeller) are kept in stock.