80ZD-Z (ZGB Slurry Pump) Parts Listtotal 36 items, 36 part codes, including Expeller (D028) , LinerA05 (80ZD-Z-02) , Frame-plate-liner Gasket (D3125) , Frame Plate LinerA05 (80ZD-Z-03) , Pump Casing (80ZD-Z-04) , Pump Cover (80ZD-Z-05) etc.; look up the material, unit weight and all fitting models of a part.
It belongs to ZGB / ZG Series Slurry Pumps. The table below lists all its parts from the factory parts book; the first items usually replaced are Expeller (D028) , LinerA05 (80ZD-Z-02) , Frame-plate-liner Gasket (D3125) , Frame Plate LinerA05 (80ZD-Z-03) .
The table below lists all parts of this model — part name, part code, material/spec, unit weight and unit. Click a part code to see its materials and every model it fits.
| Part Name | Part Code | Material / Spec | Unit Wt. | Unit |
|---|---|---|---|---|
| Frame-plate-liner Gasket | D3125 | Natural Rubber | — | pc |
| Shaft Sleeve | C075 | 4Cr13 | 2.52 | pc |
| frame | C003M | HT200 | 45 | pc |
| Lantern Ring | C063 | 1Cr18Ni9Ti | 1.15 | pc |
| Front Lantern Ring | C118 | 1Cr18Ni9Ti | 1.82 | pc |
| Split Gland | C044 | HT200 | 1.03 | pc |
| Labyrinth Ring | C108 | HT200 | 0.67 | pc |
| Locating Sleeve(Packing) | CAM117 | 3Cr13 | 1.87 | pc |
| Stuffing Box | CAM078 | HT200 | 9 | pc |
| Stuffing Box | CAM078JM | HT200 | 9 | pc |
| Expeller Cover | CAM029 | HT200 | 7.2 | pc |
| O-ring | C109 | NBR | — | pc |
| O-ring | D064 | NBR | — | pc |
| Seal Gasket | D122 | Natural Rubber | — | pc |
| Oil-cup Seat | D138 | 20 | 0.29 | pc |
| Expeller | D028 | HT200 | 3.6 | pc |
| Suction Gasket | D3060 | Natural Rubber | — | pc |
| Pump Casing | 80ZD-Z-04 | HT200 | 54 | pc |
| Pump Cover | 80ZD-Z-05 | HT200 | 53 | pc |
| ImpellerA05 | 80ZD-Z-01 | KmTBCr26 | 31 | pc |
| LinerA05 | 80ZD-Z-02 | KmTBCr26 | 39 | pc |
| Frame Plate LinerA05 | 80ZD-Z-03 | KmTBCr26 | 19 | pc |
| Inlet Stub Pipe | 80ZD-Z-06 | ZG230-450 | 10.5 | pc |
| Outlet Stub Pipe | 80ZD-Z-07 | ZG230-450 | 6.5 | pc |
| Cover Stud | 80ZD-Z-09 | 45 | 2.7 | pc |
| Bearing Body | C004A | HT200 | 18.4 | pc |
| Shaft | CAM073A | 45 | 22.56 | pc |
| End Cover | C024A | HT200 | 3.25 | pc |
| Grease Guard Ring | C046A | HT200 | 1.27 | pc |
| Labyrinth Sleeve | C062A | HT200 | 2.01 | pc |
| BSW Round NutC061 | SBB046-82 | 45 | 0.49 | pc |
| Gland BoltM10X40 | SBB047-82 | 45 | 0.19 | pc |
| Lock WasherC011 | SBB048-82 | 45 | 0.33 | pc |
| Adjusting BoltM16X150 | SBB049-82 | 45 | 0.51 | pc |
| Casing StudM16X180 | SBB052-82 | 45 | 0.53 | pc |
| Key12X95 | SBB063-82 | 45 | 0.17 | pc |
Weights are for reference onlyUnit weight varies with material, batch and minor structural changes, For reference only — actual weight per drawing and factory weighing. For exact weights call 13930163303 (WeChat same number) to verify.
Part codes of this model grouped by part name; click any code to see the models it fits.
Send “pump model + part code + material + quantity” for a fast quote. Even a single old part or a nameplate photo is enough — we will identify the part number from the parts book. Common wear parts (impeller, liner, throat bush, frame plate liner, shaft sleeve, stuffing box, expeller cover, expeller) are kept in stock.