8PH(1) (Mud / Sand / Ash Pumps) Parts Listtotal 47 items, 44 part codes, including Impeller Wear-resistant 1# (8PH(1)-004) , Liner Wear-resistant 1# (8PH-005) , Liner Plate Wear-resistant 1# (8PH(1)-006) , Pump Casing (8PH-001) , Pump Cover (8PH(1)-003) , Split Gland (10PH-019) etc.; look up the material, unit weight and all fitting models of a part.
It belongs to Mud / Rubber-lined / Sand & Ash Pumps. The table below lists all its parts from the factory parts book; the first items usually replaced are Impeller Wear-resistant 1# (8PH(1)-004) , Liner Wear-resistant 1# (8PH-005) , Liner Plate Wear-resistant 1# (8PH(1)-006) , Pump Casing (8PH-001) .
The table below lists all parts of this model — part name, part code, material/spec, unit weight and unit. Click a part code to see its materials and every model it fits.
| Part Name | Part Code | Material / Spec | Unit Wt. | Unit |
|---|---|---|---|---|
| Pump Casing | 8PH-001 | HT200 | 595 | pc |
| Casing Cover | 8PH-002 | HT200 | 400 | pc |
| Pump Cover | 8PH(1)-003 | HT200 | 312 | pc |
| Impeller Wear-resistant 1# | 8PH(1)-004 | Wear-resistant 1# | 225 | pc |
| Impeller A07 | 8PH(1)-004 | KmTBCr15Mo3 | 225 | pc |
| Liner Wear-resistant 1# | 8PH-005 | Wear-resistant 1# | 411.5 | pc |
| Liner A07 | 8PH-005 | KmTBCr15Mo3 | 411.5 | pc |
| Liner Plate Wear-resistant 1# | 8PH(1)-006 | Wear-resistant 1# | 110 | pc |
| Liner Plate A07 | 8PH(1)-006 | KmTBCr15Mo3 | 110 | pc |
| Inlet Pipe | 8PH-009 | ZG230-450 | 53 | pc |
| Outlet Pipe | 8PH-010 | ZG230-450 | 72 | pc |
| Rubber Ring | 8PH-13 | Natural Rubber | — | pc |
| Rubber Washer | 8PH-7 | Natural Rubber | — | pc |
| Rubber Washer | 8PH-11 | Natural Rubber | — | pc |
| Rubber Washer | 8PH-12 | Natural Rubber | — | pc |
| Shaft | 10PH-007 | 40Cr | 461.36 | pc |
| Shaft Sleeve | 10PH-018 | 25 | 20.81 | pc |
| Front Bearing Cover | 10PH-015 | HT150 | 16.3 | pc |
| Rear Bearing Cover | 10PH-016 | HT150 | 18.3 | pc |
| frame | 10PH-004 | HT150 | 674 | pc |
| Frame Cover | 10PH-005 | HT150 | 158 | pc |
| Pump Base | 10PH-006 | HT150 | 650 | pc |
| Impeller-nut Wrench | 10PH-038 | 35 | 6.39 | pc |
| Split Gland | 10PH-019 | HT150 | 16 | pc |
| Packing Ring | 10PH-021 | HT150 | 7 | pc |
| Oil Ring(Bronze) | 10PH-041 | ZCuSn5Pb5Zn5 | 2.2 | pc |
| Front Dust Disc | 10PH-025 | HT150 | 7 | pc |
| Adjusting Screw M30X75 | 10PH-029 | 45 | 0.6 | pc |
| Impeller Nut | 10PH-020 | 35 | 13.89 | pc |
| Adjusting Nut M30 | 10PH-030 | A3.A3F | 1.86 | pc |
| Adjusting Nut M20 | 10PH-031 | A3.A3F | 0.43 | pc |
| Protection Cap Nut A07 | 10PH-020-1 | KmTBCr15Mo3 | 9.5 | pc |
| Small Round Nut M150X3 | 10PH-023 | 45 | 3.86 | pc |
| Rubber Ring | 10PH-40 | — | — | pc |
| Dowel Pin 38 | SBB006-410-3 | 45 | 2.92 | pc |
| Retaining Ring 38 | SBB006-410-5 | A3.A3F | 0.16 | pc |
| Motor Coupling Half 90 | SBB006-410-2 | HT200 | 115.13 | pc |
| Pump Coupling Half 105 | SBB006-410-1 | HT200 | 100 | pc |
| Elastic Ring | SBB00638 | — | — | pc |
| Rear Dust Disc | SBB007-760-05 | HT150 | 7.6 | pc |
| Cooling-chamber Cover A | SBB007-760-06 | ZG230-450 | 14.5 | pc |
| Adjusting Round Nut M150X3 | SBB007-760-09 | 45 | 28.5 | pc |
| Round Nut M150X3 | SBB007-760-10 | 45 | 6.86 | pc |
| Water-cooled Gland | SBB007-760-11 | HT150 | 6.6 | pc |
| Oil Slinger Sleeve | SBB007-760-12 | 25 | 16.9 | pc |
| Round Nut M170X3 LH | SBB007-760-13 | 45 | 8.48 | pc |
| Adjustment Cover | SBB007-760-14 | HT150 | 3.5 | pc |
Weights are for reference onlyUnit weight varies with material, batch and minor structural changes, For reference only — actual weight per drawing and factory weighing. For exact weights call 13930163303 (WeChat same number) to verify.
Part codes of this model grouped by part name; click any code to see the models it fits.
Send “pump model + part code + material + quantity” for a fast quote. Even a single old part or a nameplate photo is enough — we will identify the part number from the parts book. Common wear parts (impeller, liner, throat bush, frame plate liner, shaft sleeve, stuffing box, expeller cover, expeller) are kept in stock.