2.5PS (Mud / Sand / Ash Pumps) Parts Listtotal 43 items, 43 part codes, including Impeller 2# (2.5PS-02) , Liner Plate 2# (2.5PS-03) , Pump Casing 2# (2.5PS-01) , Gland (2.5PS-13) , Shaft Sleeve (2.5PS-11) , Shaft (2.5PS-05) etc.; look up the material, unit weight and all fitting models of a part.
It belongs to Mud / Rubber-lined / Sand & Ash Pumps. The table below lists all its parts from the factory parts book; the first items usually replaced are Impeller 2# (2.5PS-02) , Liner Plate 2# (2.5PS-03) , Pump Casing 2# (2.5PS-01) , Gland (2.5PS-13) .
The table below lists all parts of this model — part name, part code, material/spec, unit weight and unit. Click a part code to see its materials and every model it fits.
| Part Name | Part Code | Material / Spec | Unit Wt. | Unit |
|---|---|---|---|---|
| Oil Seal | 50X72X12 | NBR | — | pc |
| Packing Ring 60 | B2102-60 | HT150 | 1.29 | pc |
| Pump Casing 2# | 2.5PS-01 | KmTBMn5W3 | 47 | pc |
| Water-inlet Chamber | 2.5PS-04 | HT200 | 61.5 | pc |
| Impeller 2# | 2.5PS-02 | KmTBMn5W3 | 17.4 | pc |
| Liner Plate 2# | 2.5PS-03 | KmTBMn5W3 | 10 | pc |
| Shaft | 2.5PS-05 | 45 | 28.66 | pc |
| Shaft Sleeve | 2.5PS-11 | HT200 | 2.2 | pc |
| Guard Sleeve A | 2.5PS-34 | HT200 | 1.05 | pc |
| Guard Sleeve B | 2.5PS-35 | HT200 | 2.3 | pc |
| Cylinder | 2.5PS-06 | HT200 | 32 | pc |
| Gland Cover | 2.5PS-19 | HT150 | 2.3 | pc |
| Front Bearing Cover | 2.5PS-20 | HT150 | 3 | pc |
| Rear Bearing Cover | 2.5PS-21 | HT150 | 1.7 | pc |
| Priming Sleeve | 2.5PS-10 | HT200 | 4.3 | pc |
| Telescopic Inner Sleeve | 2.5PS-23 | HT200 | 4.5 | pc |
| Telescopic Pipe Body | 2.5PS-24 | HT200 | 11.8 | pc |
| Telescopic-pipe Gland | 2.5PS-25 | HT150 | 3.4 | pc |
| Pump Base | 2.5PS-08 | HT150 | 50 | pc |
| Adjusting Bolt | 2.5PS-28 | A3.A3F | 0.39 | pc |
| Shaft-seal Body | 2.5PS-07 | HT150 | 15.6 | pc |
| Support | 2.5PS-18 | HT150 | 17.4 | pc |
| Gland | 2.5PS-13 | HT150 | 1 | pc |
| Packing Compression Ring | 2.5PS-12 | HT150 | 0.57 | pc |
| Pump Pulley | 2.5PS-09 | HT200 | 23.6 | pc |
| Motor Pulley | C2.5PS-Y180L-4 | HT200 | 35.6 | pc |
| Water-inlet Plug Cover | 2.5PS-22 | HT150 | 3 | pc |
| Cylinder Gland | 2.5PS-17 | HT150 | 5.2 | pc |
| Sand Disc | 2.5PS-16 | HT150 | 1.3 | pc |
| Seal-water Pipe 3/8" | 2.5PS-29 | A3.A3F | 0.1 | pc |
| Liner-plate Post | 2.5PS-27 | A3.A3F | 0.03 | pc |
| Impeller Nut | 2.5PS-26 | A3.A3F | 0.49 | pc |
| Locking Round Nut | 2.5PS-15 | A3.A3F | 1.83 | pc |
| Snap Ring | 2.5PS-14 | A3.A3F | 0.95 | pc |
| Rubber Washer | 2-1/2PS-30 | Natural Rubber | — | pc |
| Rubber Washer | 2-1/2PS-31 | Natural Rubber | — | pc |
| Rubber Washer | 2-1/2PS-32 | Natural Rubber | — | pc |
| Rubber Washer | 2-1/2PS-33 | Natural Rubber | — | pc |
| Rubber Washer | 2-1/2PS-36 | Natural Rubber | — | pc |
| Oil Seal | 45X70X12 | NBR | — | pc |
| Pump Coupling Half 40 | SBB005-160-1 | HT200 | 5.1 | pc |
| Motor Coupling Half 42 | SBB005A-160-02 | HT200 | 10.1 | pc |
| Elastic Washer | SBB0052 | Natural Rubber | — | pc |
Weights are for reference onlyUnit weight varies with material, batch and minor structural changes, For reference only — actual weight per drawing and factory weighing. For exact weights call 13930163303 (WeChat same number) to verify.
Part codes of this model grouped by part name; click any code to see the models it fits.
Send “pump model + part code + material + quantity” for a fast quote. Even a single old part or a nameplate photo is enough — we will identify the part number from the parts book. Common wear parts (impeller, liner, throat bush, frame plate liner, shaft sleeve, stuffing box, expeller cover, expeller) are kept in stock.