200ZGa (ZD/ZG Series) Parts Listtotal 59 items, 47 part codes, including Impeller D=740 A05 (200ZGa-01) , Expeller A07 (250ZGa-002A) , Liner A05 (200ZGa-02) , Throat Bush A05 (200ZGa-03) , Frame Plate Liner A05 (200ZGa-04) , Pump Casing (for 760 frame) (200ZGa-07) etc.; look up the material, unit weight and all fitting models of a part.
It belongs to Mud / Rubber-lined / Sand & Ash Pumps. The table below lists all its parts from the factory parts book; the first items usually replaced are Impeller D=740 A05 (200ZGa-01) , Expeller A07 (250ZGa-002A) , Liner A05 (200ZGa-02) , Throat Bush A05 (200ZGa-03) .
The table below lists all parts of this model — part name, part code, material/spec, unit weight and unit. Click a part code to see its materials and every model it fits.
| Part Name | Part Code | Material / Spec | Unit Wt. | Unit |
|---|---|---|---|---|
| O-ring | CSC210 | NBR | — | pc |
| Pump Casing (for 760 frame) | 200ZGa-07 | HT200 | 891 | pc |
| Pump Casing QT(for 760A frame) | 200ZGa-07 | QT500-7 | 891 | pc |
| Pump Casing QT(for 565 frame) | 200ZGa-07 | QT500-7 | 891 | pc |
| Pump Cover (for 760 frame) | 200ZGa-08 | HT200 | 851 | pc |
| Pump Cover QT(for 760A frame) | 200ZGa-08 | QT500-7 | 851 | pc |
| Impeller D=740 A05 | 200ZGa-01 | KmTBCr26 | 298.5 | pc |
| Impeller D=740 A07 | 200ZGa-01 | KmTBCr15Mo3 | 298.5 | pc |
| Liner A05 | 200ZGa-02 | KmTBCr26 | 275 | pc |
| Liner A07 | 200ZGa-02 | KmTBCr15Mo3 | 275 | pc |
| Throat Bush A05 | 200ZGa-03 | KmTBCr26 | 153.5 | pc |
| Throat Bush A07 | 200ZGa-03 | KmTBCr15Mo3 | 153 | pc |
| Frame Plate Liner A05 | 200ZGa-04 | KmTBCr26 | 163 | pc |
| Frame Plate Liner A07 | 200ZGa-04 | KmTBCr15Mo3 | 163 | pc |
| Shaft | 200ZGa-10 | 45 | 400 | pc |
| Shaft Sleeve CS1(Shouyangshan project only) | 200ZGa | CS1 | 32 | pc |
| Stuffing Box (Shouyangshan project only) | 200ZGa | QT500-7 | 86 | pc |
| Seal Box (Shouyangshan project only) | 200ZGa | QT500-7 | — | pc |
| Packing Ring (Shouyangshan project only) | 200ZGa | ZG1Cr18Ni9Ti | 7 | pc |
| Impeller Washer | 200ZGa-11 | A3.A3F | 5.53 | pc |
| Short Sleeve | 200ZGa-030 | 45 | 9.59 | pc |
| Expeller A07 | 250ZGa-002A | KmTBCr15Mo3 | 42 | pc |
| Expeller A05 | 250ZGa-002A | KmTBCr26 | 42 | pc |
| frame | SBB007-565-01 | HT200 | 612.7 | pc |
| Frame Cover | SBB007-565-02 | HT200 | 132.6 | pc |
| Dust Disc | SBB007-565-03 | HT200 | 9.7 | pc |
| Front Bearing Cover | SBB007-565-04 | HT150 | 17 | pc |
| Oil Slinger Disc | SBB007-565-05 | HT150 | 12.85 | pc |
| Oil Ring | SBB007-565-06 | A3.A3F | 9.13 | pc |
| Adjusting Nut A | SBB007-565-07 | 45 | 18.06 | pc |
| Adjustment Cover | SBB007-565-08 | HT150 | 2.6 | pc |
| Rear Bearing Cover | SBB007-565-09 | HT150 | 18.7 | pc |
| Adjusting Nut B | SBB007-565-10 | 45 | 13.08 | pc |
| Washer | SBB007-565-11 | HT150 | 4.41 | pc |
| Long Sleeve | SBB007-565-12 | HT200 | 6.4 | pc |
| Water-cooled Gland | SBB007-565-13 | HT150 | 7 | pc |
| Oil-inlet Washer | SBB007-565-14 | HT150 | 7.5 | pc |
| Removal Washer | SBB007-565-15 | A3.A3F | 7.28 | pc |
| Frame Body 760 | SBB007-760-01 | HT150 | 674 | pc |
| Frame Cover | SBB007-760-02 | HT150 | 158 | pc |
| Long Sleeve | SBB007-760-03 | 20 | 16.19 | pc |
| Front Dust Cover | SBB007-760-04 | HT150 | 7 | pc |
| Rear Dust Disc | SBB007-760-05 | HT150 | 7.6 | pc |
| Cooling-chamber Cover A | SBB007-760-06 | ZG230-450 | 14.5 | pc |
| Oil Ring | SBB007-760-07 | ZCuSn5Pb5Zn5 | 2.2 | pc |
| Rear Bearing Cover | SBB007-760-08 | HT150 | 18.3 | pc |
| Adjusting Round Nut M150X3 | SBB007-760-09 | 45 | 28.5 | pc |
| Round Nut M150X3 | SBB007-760-10 | 45 | 6.86 | pc |
| Water-cooled Gland | SBB007-760-11 | HT150 | 6.6 | pc |
| Oil Slinger Sleeve | SBB007-760-12 | 25 | 16.9 | pc |
| Round Nut M170X3 LH | SBB007-760-13 | 45 | 8.48 | pc |
| Adjustment Cover | SBB007-760-14 | HT150 | 3.5 | pc |
| Front Bearing Cover | SBB007-760-15 | HT200 | 16.3 | pc |
| Cooling-chamber CoverB | SBB007-760-06 | ZG230-450 | 14.5 | pc |
| Sleeve | SBB007-760A-01 | 45 | 6.3 | pc |
| Rear Bearing Cover | SBB007-760A-02 | HT200 | 21.5 | pc |
| Bearing Sleeve | SBB007-760A-04 | HT200 | 30 | pc |
| Adjusting Nut B | SBB007-760A-05 | 45 | 15.06 | pc |
| Oil Ring | SBB007-760A-06 | HT200 | 1.43 | pc |
Weights are for reference onlyUnit weight varies with material, batch and minor structural changes, For reference only — actual weight per drawing and factory weighing. For exact weights call 13930163303 (WeChat same number) to verify.
Part codes of this model grouped by part name; click any code to see the models it fits.
This model (ZGB / ZG Series Slurry Pumps) has a complete manual: structural drawings, assembly procedures, installation and alignment, operation and maintenance, parameter tables and troubleshooting.
Send “pump model + part code + material + quantity” for a fast quote. Even a single old part or a nameplate photo is enough — we will identify the part number from the parts book. Common wear parts (impeller, liner, throat bush, frame plate liner, shaft sleeve, stuffing box, expeller cover, expeller) are kept in stock.