16/14TU-AH (AH Heavy-duty Slurry Pump) Parts Listtotal 44 items, 44 part codes, including ImpellerA05 (GAM14147) , Expeller (TH028) , LinerA05 (H14110) , Throat BushA05 (H14083) , Frame Plate LinerA05 (H14041) , Pump CasingQT (H14032) etc.; look up the material, unit weight and all fitting models of a part.
It belongs to AH Heavy-duty Slurry Pump. The table below lists all its parts from the factory parts book; the first items usually replaced are ImpellerA05 (GAM14147) , Expeller (TH028) , LinerA05 (H14110) , Throat BushA05 (H14083) .
Within a series, larger suction/discharge sizes generally mean higher flow, head and max particle size. The table lists models of this series with collected clean-water performance (parts-only models and frame variants are in the “Same-series Models” tags at the page bottom), so you can move up or down the range; click “Details” for the full parts list.
| models | Flow m³/h | Head m | Speed r/min | Rated Power kW | Particle Size mm | Action |
|---|---|---|---|---|---|---|
| 1.5/1B-AH | 12.6-28.8 | 6-68 | 1200-3800 | 15 | 15 mm | Details |
| 2/1.5B-AH | 32.4-72 | 6-58 | 1200-3200 | 15 | 17 mm | Details |
| 3/2C-AH | 39.6-86.4 | 12-64 | 1300-2700 | 30 | 20 mm | Details |
| 4/3C-AH | 86.4-198 | 9-52 | 1000-2200 | 30 | 28 mm | Details |
| 6/4D-AH | 162-360 | 12-56 | 800-1550 | 60 | 45 mm | Details |
| 6/4E-AH | 180-396 | 12-56 | 800-1550 | 120 | 45 mm | Details |
| 8/6E-AH | 360-828 | 10-61 | 500-1140 | 120 | 60 mm | Details |
| 8/6R-AH | 360-828 | 10-61 | 500-1140 | 300 | 60 mm | Details |
| 10/8F-AH | 612-1368 | 11-61 | 400-850 | 260 | 80 mm | Details |
| 10/8ST-AH | 612-1368 | 11-61 | 400-850 | 560 | 80 mm | Details |
| 12/10ST-AH | 936-1980 | 7-68 | 300-800 | 560 | 95 mm | Details |
| 14/12ST-AH | 1260-2772 | 13-63 | 300-600 | 560 | 115 mm | Details |
| 16/14TU-AH | 1368-3060 | 11-63 | 250-550 | 1200 | 130 mm | This page |
| 20/18TU-AH | 2520-5400 | 13-57 | 200-400 | 1200 | 160 mm | Details |
The table below lists all parts of this model — part name, part code, material/spec, unit weight and unit. Click a part code to see its materials and every model it fits.
| Part Name | Part Code | Material / Spec | Unit Wt. | Unit |
|---|---|---|---|---|
| Oil-cup Seat | G138 | 20 | 0.42 | pc |
| O-ring | T109 | NBR | — | pc |
| Pump CasingQT | H14032 | QT500-7 | 1630 | pc |
| Pump CoverQT | H14013 | QT500-7 | 1902 | pc |
| ImpellerA05 | GAM14147 | KmTBCr26 | 1123 | pc |
| LinerA05 | H14110 | KmTBCr26 | 1403 | pc |
| Throat BushA05 | H14083 | KmTBCr26 | 496 | pc |
| Frame Plate LinerA05 | H14041 | KmTBCr26 | 400 | pc |
| Long Sleeve | TH076 | CS1 | 86 | pc |
| Short Sleeve | TH075 | CS1 | 75 | pc |
| Stuffing Box | H078 | HT200 | 242 | pc |
| Expeller | TH028 | HT200 | 166 | pc |
| Expeller Cover | H029 | HT200 | 214 | pc |
| frameQT | TU003 | QT500-7 | 2090 | pc |
| Lantern Ring | H063 | ATNi14Cu6 | 6.7 | pc |
| Front Lantern Ring | H118 | ATNi14Cu6 | 14 | pc |
| Packing Washer | H067 | 1Cr18Ni9Ti | 4.7 | pc |
| Suspension Pipe | H14302 | 20 | 105.2 | pc |
| Lifting Beam | H14304 | 20 | 78.22 | pc |
| Clamp QT | T315 | QT500-7 | 7 | pc |
| Split Gland | H044 | HT200 | 12 | pc |
| Impeller Removal Ring | T239M | CS1 | 7.2 | pc |
| Cover Stud | H14015M | 35 | 42.1 | pc |
| O-ring | H122 | NBR | — | pc |
| O-ring | TH064 | NBR | — | pc |
| Suction Gasket | H14060 | Natural Rubber | — | pc |
| Discharge Gasket | H14132H | Natural Rubber | — | pc |
| Discharge Gasket | H14132L | Natural Rubber | — | pc |
| Liner Gasket | H14124 | Natural Rubber | — | pc |
| Bearing Body | T004M | QT500-7 | 392 | pc |
| Shaft | TH073 | 45 | 699.1 | pc |
| End Cover | T024 | HT200 | 35 | pc |
| Labyrinth Sleeve (pump end) | T062 | QT500-7 | 17 | pc |
| Labyrinth Sleeve (drive end) | T062DM | QT500-7 | 26.4 | pc |
| Bearing Guard Sleeve | T008 | A3.A3F | 4.57 | pc |
| Gland BoltM20X95 | SBB047-82 | 45 | 0.55 | pc |
| Lock WasherT011 | SBB048-82 | 45 | 3.18 | pc |
| Adjusting BoltM42X470 | SBB049-82 | 45 | 7.65 | pc |
| Casing StudM64X515 | SBB052-82 | 45 | 21.54 | pc |
| NutM64 | SBB056-82 | A3.A3F | 4.03 | pc |
| Key36X300 | SBB063-82 | 45 | 2.85 | pc |
| Bearing Assembly | TH005M | — | — | pc |
| Stuffing Box | TU18078 | D21 / A05 / G01 / C23 | — | pc |
| Stuffing Box (high-seal) | TU18078HS1 | D21 / A05 / G01 / C23 | — | pc |
Weights are for reference onlyUnit weight varies with material, batch and minor structural changes, For reference only — actual weight per drawing and factory weighing. For exact weights call 13930163303 (WeChat same number) to verify.
Part codes of this model grouped by part name; click any code to see the models it fits.
| Pump Model | 16/14TU-AH |
|---|---|
| Category | Slurry Pumps |
| Series | AH Heavy-duty Slurry Pump |
| Rated Power | 1200 kW |
| Flow | 1368-3060 m³/h (380-850 L/s) |
| Head | 11-63 m |
| Speed | 250-550 r/min |
| Peak Efficiency | 79 % |
| NPSH | 4-10 m |
| Blades | 5 |
| Impeller Dia. | 1067 mm |
| Max. Particle Size | 130 mm |
| Wet-end Material | High-chrome A05 (A07/A33/A49 optional) |
| Drive | CRZ, CV, DCZ, ZVZ |
| Shaft Seal | Gland packing, expeller seal, mechanical seal |
| Model Nomenclature | 3/2C-AH: suction 3 in, discharge 2 in, C frame, AH Series Slurry Pumps. |
This model (Common to AH / HH / M / L / G Series) has a complete manual: structural drawings, assembly procedures, installation and alignment, operation and maintenance, parameter tables and troubleshooting.
Send “pump model + part code + material + quantity” for a fast quote. Even a single old part or a nameplate photo is enough — we will identify the part number from the parts book. Common wear parts (impeller, liner, throat bush, frame plate liner, shaft sleeve, stuffing box, expeller cover, expeller) are kept in stock.