10/8R-M (M Medium-head Slurry Pump) Parts Listtotal 40 items, 40 part codes, including Expeller (EAM028) , LinerA05 (F8110) , Throat BushA05 (F8083) , Frame Plate LinerA05 (F8041) , Frame-plate-liner Gasket (F122) , Pump Casing (EM8032) etc.; look up the material, unit weight and all fitting models of a part.
It belongs to M Medium-head Slurry Pump. The table below lists all its parts from the factory parts book; the first items usually replaced are Expeller (EAM028) , LinerA05 (F8110) , Throat BushA05 (F8083) , Frame Plate LinerA05 (F8041) .
Within a series, larger suction/discharge sizes generally mean higher flow, head and max particle size. The table lists models of this series with collected clean-water performance (parts-only models and frame variants are in the “Same-series Models” tags at the page bottom), so you can move up or down the range; click “Details” for the full parts list.
| models | Flow m³/h | Head m | Speed r/min | Rated Power kW | Particle Size mm | Action |
|---|---|---|---|---|---|---|
| 10/8E-M | 666-1440 | 14-60 | 600-1100 | 120 | 80 mm | Details |
| 10/8R-M | 666-1440 | 14-60 | 600-1100 | 260 | 80 mm | This page |
| 10/8F-M | 666-1440 | 14-60 | 600-1100 | 260 | 80 mm | Details |
| 12/10F-M | 936-1980 | 10-60 | 400-900 | 260 | 95 mm | Details |
| 12/10R-M | 936-1980 | 10-60 | 400-900 | 260 | 95 mm | Details |
The table below lists all parts of this model — part name, part code, material/spec, unit weight and unit. Click a part code to see its materials and every model it fits.
| Part Name | Part Code | Material / Spec | Unit Wt. | Unit |
|---|---|---|---|---|
| O-ring | F064 | NBR | — | pc |
| O-ring | E109 | NBR | 1.88 | pc |
| Shaft Sleeve | E075 | 3Cr13 | 10.44 | pc |
| Stuffing Box | EAM078 | HT200 | 41 | pc |
| Expeller | EAM028 | HT200 | 8.2 | pc |
| Expeller Cover | EAM029 | HT200 | 17.6 | pc |
| Lantern Ring | E063 | 1Cr18Ni9Ti | 2.87 | pc |
| Front Lantern Ring | E118 | 1Cr18Ni9Ti | 4.08 | pc |
| Packing Washer | E067 | 1Cr18Ni9Ti | 0.96 | pc |
| Split Gland | E044 | HT200 | 3.8 | pc |
| Pump Casing | EM8032 | HT200 | 266 | pc |
| Pump Cover | F8013 | HT200 | 238 | pc |
| ImpellerA05 | F8147 | KmTBCr26 | 210.5 | pc |
| LinerA05 | F8110 | KmTBCr26 | 299 | pc |
| Throat BushA05 | F8083 | KmTBCr26 | 101.5 | pc |
| Frame Plate LinerA05 | F8041 | KmTBCr26 | 78.5 | pc |
| Locating Plate | F8081 | 20 | 0.36 | pc |
| Cover Stud | F8015M | 45 | 4.49 | pc |
| Suction Gasket | F8060 | Natural Rubber | — | pc |
| Discharge Gasket | F8132XLP | Natural Rubber | — | pc |
| O-ring | F109 | NBR | — | pc |
| Long Sleeve | EAM076 | 4Cr13 | 15.16 | pc |
| frameQT | R003M | QT500-7 | 228 | pc |
| Clamp | R315 | HT200 | 2.5 | pc |
| Lip Seal | E090 | NBR | — | pc |
| Liner Gasket | F8124 | Natural Rubber | — | pc |
| Frame-plate-liner Gasket | F122 | Natural Rubber | — | pc |
| Bearing Body | R004M | QT500-7 | 73 | pc |
| Shaft | R073-1 | 45 | 126.34 | pc |
| Labyrinth Sleeve (pump end) | R062-1 | QT500-7 | 5 | pc |
| Labyrinth Sleeve (drive end) | R062DM | QT500-7 | 6 | pc |
| End Cover(pump end) | R024 | HT200 | 10 | pc |
| End Cover(drive end) | R024D | HT200 | 9 | pc |
| Gland BoltM16X55 | SBB047-82 | 45 | 0.27 | pc |
| Lock WasherR011 | SBB048-82 | 45 | 0.94 | pc |
| Adjusting BoltM24X280 | SBB049-82 | 45 | 1.72 | pc |
| Locating Wedge250X38 | SBB050-82 | A3.A3F | 0.61 | pc |
| Casing BoltM24X260 | SBB051-82 | 45 | 1.84 | pc |
| Square-head ScrewM20X130 | SBB054-82 | 45 | 0.66 | pc |
| Bearing Assembly | R005M | — | — | pc |
Weights are for reference onlyUnit weight varies with material, batch and minor structural changes, For reference only — actual weight per drawing and factory weighing. For exact weights call 13930163303 (WeChat same number) to verify.
Part codes of this model grouped by part name; click any code to see the models it fits.
| Pump Model | 10/8R-M |
|---|---|
| Category | Slurry Pumps |
| Series | M Medium-head Slurry Pump |
| Rated Power | 260 kW |
| Flow | 666-1440 m³/h (185-400 L/s) |
| Head | 14-60 m |
| Speed | 600-1100 r/min |
| Peak Efficiency | 73 % |
| NPSH | 4-10 m |
| Blades | 5 |
| Impeller Dia. | 549 mm |
| Max. Particle Size | 80 mm |
| Wet-end Material | rubber-lined wet ends |
| Drive | CRZ, CV, DCZ, ZVZ |
| Shaft Seal | Gland packing, expeller seal, mechanical seal |
| Model Nomenclature | 10/8E-M: suction 10 in, discharge 8 in, E frame, M Medium-head Slurry Pump. |
This model (Common to AH / HH / M / L / G Series) has a complete manual: structural drawings, assembly procedures, installation and alignment, operation and maintenance, parameter tables and troubleshooting.
Send “pump model + part code + material + quantity” for a fast quote. Even a single old part or a nameplate photo is enough — we will identify the part number from the parts book. Common wear parts (impeller, liner, throat bush, frame plate liner, shaft sleeve, stuffing box, expeller cover, expeller) are kept in stock.