10/8S-GH (GH High-head Gravel Pump) Parts Listtotal 40 items, 40 part codes, including Expeller (FH028) , Liner Gasket (G8124) , Throat BushA05 (FGH8013) , Frame Plate LinerA05 (FGH8041) , Throat-bush Connecting Plate (FGH8292) , Pump CasingA05 (FGH8131) etc.; look up the material, unit weight and all fitting models of a part.
It belongs to G(GH) Gravel & TBM Pumps. The table below lists all its parts from the factory parts book; the first items usually replaced are Expeller (FH028) , Liner Gasket (G8124) , Throat BushA05 (FGH8013) , Frame Plate LinerA05 (FGH8041) .
Within a series, larger suction/discharge sizes generally mean higher flow, head and max particle size. The table lists models of this series with collected clean-water performance (parts-only models and frame variants are in the “Same-series Models” tags at the page bottom), so you can move up or down the range; click “Details” for the full parts list.
| models | Flow m³/h | Head m | Speed r/min | Rated Power kW | Particle Size mm | Action |
|---|---|---|---|---|---|---|
| 10/8S-GH | 216-936 | 8-52 | 500-1000 | 560 | 120 mm | This page |
| 10/8FF-GH | 216-936 | 8-52 | 500-1000 | 560 | 120 mm | Details |
| 12/10G-GH | 288-2808 | 16-80 | 350-700 | 1200 | 150 mm | Details |
The table below lists all parts of this model — part name, part code, material/spec, unit weight and unit. Click a part code to see its materials and every model it fits.
| Part Name | Part Code | Material / Spec | Unit Wt. | Unit |
|---|---|---|---|---|
| Oil-cup Seat | D138 | 20 | 0.29 | pc |
| O-ring | F109 | NBR | — | pc |
| O-ring | FH122 | NBR | — | pc |
| Front Lantern Ring | F118 | 1Cr18Ni9Ti | 7.86 | pc |
| Split Suction Flange | F10130 | 25 | 73.64 | pc |
| Split Discharge Flange | F8130 | 25 | 42.26 | pc |
| Shaft Sleeve | F075 | CS1 | 9 | pc |
| Locating Sleeve | FG117 | CS1 | 4 | pc |
| Guard Sleeve | S179-3 | CS1 | 6.3 | pc |
| Stuffing Box | FH078 | HT200 | 86 | pc |
| Expeller | FH028 | HT200 | 39 | pc |
| Expeller Cover | FH029 | HT200 | 82.5 | pc |
| frameQT | S003M | QT500-7 | 546 | pc |
| Lantern Ring | F063 | 1Cr18Ni9Ti | 4.95 | pc |
| Packing Washer | F067 | 1Cr18Ni9Ti | 1.4 | pc |
| Split Gland | F044 | HT200 | 5.5 | pc |
| Impeller Removal Ring | S239M | CS1 | 8.2 | pc |
| Liner Gasket | G8124 | Natural Rubber | — | pc |
| Pump CasingA05 | FGH8131 | KmTBCr26 | 957 | pc |
| ImpellerA05 | FGH8137 | KmTBCr26 | 355 | pc |
| Throat BushA05 | FGH8013 | KmTBCr26 | 230 | pc |
| Frame Plate LinerA05 | FGH8041 | KmTBCr26 | 170 | pc |
| frame | A1-1124 | QT500-7 | 546 | pc |
| Clamp Band | FGH8135 | — | 74.28 | pc |
| Joint Plate | FGH8032 | QT500-7 | 240 | pc |
| Throat-bush Connecting Plate | FGH8292 | QT500-7 | 190 | pc |
| Suction Gasket | FG10132 | Natural Rubber | — | pc |
| Discharge Gasket | F8132 | Natural Rubber | — | pc |
| O-ring | CSC210 | NBR | — | pc |
| Bearing Body | S004M | QT500-7 | 151.5 | pc |
| Shaft | S073-3M | 45 | 238.53 | pc |
| End Cover | S024 | HT200 | 17.5 | pc |
| Labyrinth Sleeve (pump end) | S062 | QT500-7 | 9.6 | pc |
| Labyrinth Sleeve (drive end) | S062DM | QT500-7 | 14.5 | pc |
| Gland BoltM20X75 | SBB047-82 | 45 | 0.47 | pc |
| Lock WasherF011 | SBB048-82 | 45 | 1.4 | pc |
| Adjusting BoltM30X345 | SBB049-82 | 45 | 3.44 | pc |
| Casing BoltM30X330 | SBB051-82 | 45 | 3.31 | pc |
| BoltM30X305 | SBB087-85 | 45 | 2.9 | pc |
| Bearing Assembly | S005-3M | — | — | pc |
Weights are for reference onlyUnit weight varies with material, batch and minor structural changes, For reference only — actual weight per drawing and factory weighing. For exact weights call 13930163303 (WeChat same number) to verify.
Part codes of this model grouped by part name; click any code to see the models it fits.
| Pump Model | 10/8S-GH |
|---|---|
| Category | Slurry Pumps |
| Series | GH High-head Gravel Pump |
| Rated Power | 560 kW |
| Flow | 216-936 m³/h (60-260 L/s) |
| Head | 8-52 m |
| Speed | 500-1000 r/min |
| Peak Efficiency | 65 % |
| NPSH | 3-7.5 m |
| Blades | — |
| Impeller Dia. | 533 mm |
| Max. Particle Size | 120 mm |
| Wet-end Material | High-chrome A05 (A07/A33/A49 optional) |
| Drive | CRZ, CV, DCZ, ZVZ |
| Shaft Seal | Gland packing, expeller seal, mechanical seal |
| Model Nomenclature | 6/4D-G: 6 insuction, 4 indischarge, D frame, G Gravel Pump. |
This model (Common to AH / HH / M / L / G Series) has a complete manual: structural drawings, assembly procedures, installation and alignment, operation and maintenance, parameter tables and troubleshooting.
Send “pump model + part code + material + quantity” for a fast quote. Even a single old part or a nameplate photo is enough — we will identify the part number from the parts book. Common wear parts (impeller, liner, throat bush, frame plate liner, shaft sleeve, stuffing box, expeller cover, expeller) are kept in stock.