100WGF (W/PW Series Sewage Pumps) Parts Listtotal 25 items, 24 part codes, including Impeller Nut (100WDF-010) , Pump Casing (100WGF-002) , Pump Cover (100WGF-001) , Stuffing Box (100WDF-004) , Gland (100WDF-009) , Shaft Sleeve (100WDF-006) etc.; look up the material, unit weight and all fitting models of a part.
It belongs to Sewage & Clean-water Pumps. The table below lists all its parts from the factory parts book; the first items usually replaced are Impeller Nut (100WDF-010) , Pump Casing (100WGF-002) , Pump Cover (100WGF-001) , Stuffing Box (100WDF-004) .
The table below lists all parts of this model — part name, part code, material/spec, unit weight and unit. Click a part code to see its materials and every model it fits.
| Part Name | Part Code | Material / Spec | Unit Wt. | Unit |
|---|---|---|---|---|
| Shaft | 100WD-005 | 45 | 22.75 | pc |
| Coupling Guard | 100WD-A103 | A3.A3F | 2.03 | pc |
| O-ring | 60X3.1 | NBR | — | pc |
| Base | 100WG-A101 | HT150 | 72 | pc |
| Shaft Sleeve | 100WDF-006 | 1Cr18Ni9Ti | 7.75 | pc |
| Stuffing Box | 100WDF-004 | ZG1Cr18Ni9Ti | 23.6 | pc |
| Single Mechanical Seal Body 80 | 100WDF-011 | ZG1Cr18Ni9Ti | 37 | pc |
| Discharge Pipe | 100WDF-014 | ZG1Cr18Ni9Ti | 17 | pc |
| Gland | 100WDF-009 | ZG1Cr18Ni9Ti | 2.4 | pc |
| Packing Ring | 100WDF-008 | ZG1Cr18Ni9Ti | 1.42 | pc |
| Single Mechanical Seal Cover 80 | 100WDF-012 | ZG1Cr18Ni9Ti | 3.8 | pc |
| Impeller Nut | 100WDF-010 | 1Cr18Ni9Ti | 1.09 | pc |
| Pump Casing | 100WGF-002 | ZG1Cr18Ni9Ti | 61 | pc |
| Pump Cover | 100WGF-001 | ZG1Cr18Ni9Ti | 36 | pc |
| Impeller | 100WGF-003 | ZG1Cr18Ni9Ti | 24.5 | pc |
| Seal Ring | 100WGF-007 | ZG1Cr18Ni9Ti | 1.27 | pc |
| Pump Coupling Half 35 | SBB005-160-01 | HT200 | 5.3 | pc |
| Motor Coupling Half 42 | SBB005A-160-02 | HT200 | 10.1 | pc |
| Motor Coupling Half 55 | SBB005A-160-02 | HT200 | 9.2 | pc |
| Elastic Washer | SBB0052 | Natural Rubber | — | pc |
| Frame Body | SBB007-225-01 | HT200 | 46.5 | pc |
| Rear Bearing Cover | SBB007-225-02 | HT150 | 2.1 | pc |
| Splash Guard Sleeve | SBB007-225-03 | HT150 | 1.3 | pc |
| Front Bearing Cover | SBB007-225-04 | HT150 | 2 | pc |
| Grease Guard Ring | SBB007-225-05 | 45 | 1.65 | pc |
Weights are for reference onlyUnit weight varies with material, batch and minor structural changes, For reference only — actual weight per drawing and factory weighing. For exact weights call 13930163303 (WeChat same number) to verify.
Part codes of this model grouped by part name; click any code to see the models it fits.
Send “pump model + part code + material + quantity” for a fast quote. Even a single old part or a nameplate photo is enough — we will identify the part number from the parts book. Common wear parts (impeller, liner, throat bush, frame plate liner, shaft sleeve, stuffing box, expeller cover, expeller) are kept in stock.