WQ600-20-75 (WQ Submersible Sewage Pumps) Parts Listtotal 25 items, 25 part codes, including Impeller (WQ600-20-75-118) , Pump Casing (WQ600-20-75-119) , Pump Cover (WQ600-20-75-114) , Shaft Sleeve (WQ600-20-75-122) , Shaft (WQ600-20-75-124) , Seal Ring (WQ600-20-75-112) etc.; look up the material, unit weight and all fitting models of a part.
It belongs to Sewage & Clean-water Pumps. The table below lists all its parts from the factory parts book; the first items usually replaced are Impeller (WQ600-20-75-118) , Pump Casing (WQ600-20-75-119) , Pump Cover (WQ600-20-75-114) , Shaft Sleeve (WQ600-20-75-122) .
The table below lists all parts of this model — part name, part code, material/spec, unit weight and unit. Click a part code to see its materials and every model it fits.
| Part Name | Part Code | Material / Spec | Unit Wt. | Unit |
|---|---|---|---|---|
| Plug | WQ85-25-42 | A3.A3F | 0.2 | pc |
| Pump Casing | WQ600-20-75-119 | HT250 | 123.5 | pc |
| Pump Cover | WQ600-20-75-114 | HT250 | 61 | pc |
| Impeller | WQ600-20-75-118 | HT250 | 83 | pc |
| Shaft | WQ600-20-75-124 | 2Cr13 | 155.5 | pc |
| Shaft Sleeve | WQ600-20-75-122 | 2Cr13 | 17.3 | pc |
| Bearing Cover | WQ600-20-75-106 | HT250 | 7.8 | pc |
| Agitator | WQ600-20-75-115 | ZG1Cr13 | 5 | pc |
| Filter Screen | WQ600-20-75-113-0 | A3.A3F | 495.26 | pc |
| Seal Ring | WQ600-20-75-112 | 1Cr18Ni9Ti | 5.4 | pc |
| Motor Housing | WQ600-20-75-104 | HT200 | 537 | pc |
| Sleeve | WQ600-20-75-125-0 | A3.A3F | 291 | pc |
| Motor Lower End Cover (B) | WQ600-20-75-121 | HT250 | 172 | pc |
| Motor Upper End Cover | WQ600-20-75-102 | HT250 | 130 | pc |
| Terminal-box Cover | WQ600-20-75-127 | HT200 | 164 | pc |
| Terminal Board | WQ600-20-75-130 | Plastic | 3.34 | pc |
| Locating Screw | WQ600-20-75-105 | A3.A3F | 0.2 | pc |
| Impeller Nut (A) | WQ600-20-75-110 | 1Cr18Ni9Ti | 2.75 | pc |
| Cable Box | 200ZQ-20-23 | ZG230-450 | 5 | pc |
| Cable Clamp (B) | 200ZQ-20-20 | HT200 | 0.8 | pc |
| Connecting Sheet | 200ZQ-20-19 | H62 | 0.27 | pc |
| Terminal Post | 200ZQ-20-21 | H62 | 1.32 | pc |
| Oil-tank Plug | 200ZQ-20-30 | A3.A3F | 0.52 | pc |
| Cable Clamp Washer | 200ZQ-20-26 | A3.A3F | 0.38 | pc |
| Inspection Cover Φ140x30 | J164-W212567 | HT250 | 5.2 | pc |
Weights are for reference onlyUnit weight varies with material, batch and minor structural changes, For reference only — actual weight per drawing and factory weighing. For exact weights call 13930163303 (WeChat same number) to verify.
Part codes of this model grouped by part name; click any code to see the models it fits.
Send “pump model + part code + material + quantity” for a fast quote. Even a single old part or a nameplate photo is enough — we will identify the part number from the parts book. Common wear parts (impeller, liner, throat bush, frame plate liner, shaft sleeve, stuffing box, expeller cover, expeller) are kept in stock.