WQ200-15-22 (WQ Submersible Sewage Pumps) Parts Listtotal 25 items, 25 part codes, including Impeller (WQ200-15-03) , Pump Casing (WQ200-15-01) , Pump Cover (WQ200-15-02) , Shaft Sleeve (WQ200-15-11) , Shaft (with agitator) (WQ200-15-05-1) , Bearing Cover (WQ200-15-09) etc.; look up the material, unit weight and all fitting models of a part.
It belongs to Sewage & Clean-water Pumps. The table below lists all its parts from the factory parts book; the first items usually replaced are Impeller (WQ200-15-03) , Pump Casing (WQ200-15-01) , Pump Cover (WQ200-15-02) , Shaft Sleeve (WQ200-15-11) .
The table below lists all parts of this model — part name, part code, material/spec, unit weight and unit. Click a part code to see its materials and every model it fits.
| Part Name | Part Code | Material / Spec | Unit Wt. | Unit |
|---|---|---|---|---|
| Cable Clamp (A) | WQ85-25-27 | HT150 | 0.5 | pc |
| Cable Clamp (B) | WQ85-25-28 | HT150 | 0.3 | pc |
| Cable Gland | WQ85-25-20 | 20 | 3.69 | pc |
| Oil-sump Bolt | WQ85-25-39 | 1Cr18Ni9Ti | 0.21 | pc |
| Plug | WQ85-25-42 | A3.A3F | 0.2 | pc |
| Stator Set Screw | WQ85-25-40 | 1Cr18Ni9Ti | 0.23 | pc |
| Pump Casing | WQ200-15-01 | HT200 | 123.5 | pc |
| Pump Cover | WQ200-15-02 | HT200 | 28 | pc |
| Impeller | WQ200-15-03 | HT200 | 22.5 | pc |
| Shaft (with agitator) | WQ200-15-05-1 | 45 | 47.21 | pc |
| Shaft Sleeve | WQ200-15-11 | 40Cr | 4.18 | pc |
| Bearing Cover | WQ200-15-09 | HT200 | 3.5 | pc |
| Agitator | WQ200-15-17 | ZG230-450 | 13.5 | pc |
| Outlet Pipe | WQ200-15-21 | HT150 | 26.5 | pc |
| Outlet Elbow | WQ200-15-20 | HT150 | 28.5 | pc |
| Filter Screen | WQ200-15-22 | A3.A3F | 183.86 | pc |
| Cover Wear Ring | WQ200-15-18 | HT200 | 3 | pc |
| Motor Housing | WQ200-15-07 | HT200 | 156 | pc |
| Outer Cover | WQ200-15-08 | 20 | 68.37 | pc |
| Motor Lower End Cover (Mechanical seal) | WQ200-15-06-1 | HT200 | 84 | pc |
| Motor Upper End Cover | WQ200-15-23 | HT200 | 50 | pc |
| Terminal-box Cover | WQ200-15-24 | HT200 | 87 | pc |
| Terminal Plate | WQ200-15-19 | 20 | 10.78 | pc |
| Shaft-end Nut | WQ200-15-16 | 1Cr18Ni9Ti | 1.49 | pc |
| Bearing Shim | WQ200-15-10 | 45 | 0.33 | pc |
Weights are for reference onlyUnit weight varies with material, batch and minor structural changes, For reference only — actual weight per drawing and factory weighing. For exact weights call 13930163303 (WeChat same number) to verify.
Part codes of this model grouped by part name; click any code to see the models it fits.
Send “pump model + part code + material + quantity” for a fast quote. Even a single old part or a nameplate photo is enough — we will identify the part number from the parts book. Common wear parts (impeller, liner, throat bush, frame plate liner, shaft sleeve, stuffing box, expeller cover, expeller) are kept in stock.