80PWF (W/PW Series Sewage Pumps) Parts Listtotal 24 items, 24 part codes, including Impeller (80PWF-002) , Pump Casing (80PWF-001) , Pump Cover (80PWF-006) , Gland 55 (80F-60-008) , Shaft Sleeve (80PWF-007) , Shaft (80PWF-004) etc.; look up the material, unit weight and all fitting models of a part.
It belongs to Sewage & Clean-water Pumps. The table below lists all its parts from the factory parts book; the first items usually replaced are Impeller (80PWF-002) , Pump Casing (80PWF-001) , Pump Cover (80PWF-006) , Gland 55 (80F-60-008) .
The table below lists all parts of this model — part name, part code, material/spec, unit weight and unit. Click a part code to see its materials and every model it fits.
| Part Name | Part Code | Material / Spec | Unit Wt. | Unit |
|---|---|---|---|---|
| Oil Seal | 40X62X12 | NBR | — | pc |
| Pump Casing | 80PWF-001 | ZG1Cr18Ni9Ti | 37 | pc |
| Pump Cover | 80PWF-006 | ZG1Cr18Ni9Ti | 15.5 | pc |
| Front Pump Cover | 80PWF-003 | ZG1Cr18Ni9Ti | 26 | pc |
| Impeller | 80PWF-002 | ZG1Cr18Ni9Ti | 15.5 | pc |
| Shaft | 80PWF-004 | 1Cr18Ni9Ti | 8.55 | pc |
| Shaft Sleeve | 80PWF-007 | 1Cr18Ni9Ti | 3.61 | pc |
| Bearing End Cover | 80F-60-007 | HT150 | 1.3 | pc |
| frame 40 | 80F-60-006 | HT200 | 43 | pc |
| Base | 80PWF-Y132S-4 | HT150 | 62 | pc |
| Impeller-nut Wrench 36 | 80F-60-018 | A3.A3F | 1.38 | pc |
| Seal Ring 115 | 80PWF-005 | 1Cr18Ni9Ti | 2.64 | pc |
| Gland 55 | 80F-60-008 | ZG1Cr18Ni9Ti | 2.5 | pc |
| Packing Ring 55 | 80F-60-009 | 1Cr18Ni9Ti | 1.07 | pc |
| Seal Gland 55 | 80F-60-012 | ZG1Cr18Ni9Ti | 4 | pc |
| Drip Tray 40 | 80F-60-011 | HT150 | 1 | pc |
| Impeller Nut 45 | 80F-60-010 | 1Cr18Ni9Ti | 0.4 | pc |
| Rubber Washer | 240X300X1 | Acid-resistant Asbestos Sheet | — | pc |
| Rubber Washer | 230X244X1 | Acid-resistant Asbestos Sheet | — | pc |
| Pipe Plug 1/4" | B3303-70-02 | 1Cr18Ni12Mo2Ti | 0.12 | pc |
| Pipe Plug 3/8" | B3303-70-03 | 1Cr18Ni12Mo2Ti | 0.19 | pc |
| Pump Coupling Half 35 | SBB005-160-1 | HT200 | 5.1 | pc |
| Motor Coupling Half 38 | SBB005A-160-02 | HT200 | 10.3 | pc |
| Elastic Washer | SBB0052 | Natural Rubber | — | pc |
Weights are for reference onlyUnit weight varies with material, batch and minor structural changes, For reference only — actual weight per drawing and factory weighing. For exact weights call 13930163303 (WeChat same number) to verify.
Part codes of this model grouped by part name; click any code to see the models it fits.
Send “pump model + part code + material + quantity” for a fast quote. Even a single old part or a nameplate photo is enough — we will identify the part number from the parts book. Common wear parts (impeller, liner, throat bush, frame plate liner, shaft sleeve, stuffing box, expeller cover, expeller) are kept in stock.