8PWA (W/PW Series Sewage Pumps) Parts Listtotal 33 items, 32 part codes, including Impeller D2=465 (8PWLA-102) , Pump Casing (8PW-004) , Pump Cover (8PW-005) , Stuffing Box (250WD-003) , Split Gland (8PWL-0013) , Shaft (8PW-002) etc.; look up the material, unit weight and all fitting models of a part.
It belongs to Sewage & Clean-water Pumps. The table below lists all its parts from the factory parts book; the first items usually replaced are Impeller D2=465 (8PWLA-102) , Pump Casing (8PW-004) , Pump Cover (8PW-005) , Stuffing Box (250WD-003) .
The table below lists all parts of this model — part name, part code, material/spec, unit weight and unit. Click a part code to see its materials and every model it fits.
| Part Name | Part Code | Material / Spec | Unit Wt. | Unit |
|---|---|---|---|---|
| Stuffing Box | 250WD-003 | HT200 | 89 | pc |
| Pump Casing | 8PW-004 | HT200 | 194 | pc |
| Pump Cover | 8PW-005 | HT200 | 115 | pc |
| Shaft | 8PW-002 | 45 | 85.99 | pc |
| Pump Base | 8PW-001 | HT150 | 135.5 | pc |
| Pump Support | 8PW-003 | HT150 | 32 | pc |
| Impeller D2=465 | 8PWLA-102 | HT200 | 88 | pc |
| Handhole Clamp | 8PWL-0018 | ZG230-450 | 4 | pc |
| Seal Ring | 8PWL-0009 | HT200 | 3.5 | pc |
| Split Gland | 8PWL-0013 | HT150 | 7 | pc |
| Packing Ring | 8PWL-0021 | HT150 | 4.5 | pc |
| Handhole Cover A | 8PWL-0015 | HT150 | 4.2 | pc |
| Handhole Cover B | 8PWL-0005 | HT150 | 4.2 | pc |
| Clamp Screw | 8PWL-0019 | A3.A3F | 0.51 | pc |
| Impeller Nut | 8PWL-0014 | A3.A3F | 3.36 | pc |
| 3/8"Pipe Joint | B3201-03-1 | A3.A3F | 0.16 | pc |
| 3/8"PipeNut | B3201-03-2 | A3.A3F | 0.11 | pc |
| Front Bearing Cover | 4PH-14 | HT150 | 9 | pc |
| Rear Bearing Cover | 4PH-15 | HT150 | 10.3 | pc |
| Oil-hole Cover | 4PH-13 | HT150 | 3.4 | pc |
| Cooling-chamber Cover | 4PH-22 | HT150 | 5.5 | pc |
| frame | 4PH-10 | HT150 | 260 | pc |
| Frame Cover | 4PH-12 | HT150 | 60 | pc |
| Splash Disc | 6PH-18 | HT150 | 2.2 | pc |
| Oil Seal | 80X105X12 | NBR | — | pc |
| Round Internal-tab Lock Washer | B07-68 | A0 | 0.09 | pc |
| Dowel Pin 18 | SBB006-220-3 | 45 | 0.47 | pc |
| Retaining Ring 18 | SBB006-220-5 | A3.A3F | 0.04 | pc |
| Pump Coupling Half 60 | SBB006-220-1 | HT200 | 16.3 | pc |
| Motor Coupling Half 85 | SBB006-220-2 | HT200 | 22.91 | pc |
| Elastic Ring | SBB00618 | Natural Rubber | — | pc |
| Motor Coupling Half 75 | SBB006A-220-02 | HT200 | 23.71 | pc |
| Motor Coupling Half 80 | SBB006A-220-02 | HT200 | 23.1 | pc |
Weights are for reference onlyUnit weight varies with material, batch and minor structural changes, For reference only — actual weight per drawing and factory weighing. For exact weights call 13930163303 (WeChat same number) to verify.
Part codes of this model grouped by part name; click any code to see the models it fits.
Send “pump model + part code + material + quantity” for a fast quote. Even a single old part or a nameplate photo is enough — we will identify the part number from the parts book. Common wear parts (impeller, liner, throat bush, frame plate liner, shaft sleeve, stuffing box, expeller cover, expeller) are kept in stock.