80WGF (W/PW Series Sewage Pumps) Parts Listtotal 34 items, 32 part codes, including Impeller X196 (80WGF-003) , Pump Casing (80WGF-002) , Pump Cover (80WGF-001) , Stuffing Box (80WGF-004) , Gland (80WGF-009) , Shaft Sleeve (80WGF-006) etc.; look up the material, unit weight and all fitting models of a part.
It belongs to Sewage & Clean-water Pumps. The table below lists all its parts from the factory parts book; the first items usually replaced are Impeller X196 (80WGF-003) , Pump Casing (80WGF-002) , Pump Cover (80WGF-001) , Stuffing Box (80WGF-004) .
The table below lists all parts of this model — part name, part code, material/spec, unit weight and unit. Click a part code to see its materials and every model it fits.
| Part Name | Part Code | Material / Spec | Unit Wt. | Unit |
|---|---|---|---|---|
| Shaft | 80WG-005 | 45 | 9.62 | pc |
| Base | 80WG-B101 | HT200 | 73.5 | pc |
| Base | 80WG-B102 | HT150 | 67.3 | pc |
| Base | 80WG-B103 | HT150 | 50 | pc |
| Pump Base | 80WG-A201 | HT150 | 15.1 | pc |
| Belt Guard | 80WG-A202 | A3.A3F | 5.64 | pc |
| Coupling Guard(A) | 80WG-A104 | A3.A3F | 1.92 | pc |
| Coupling Guard(B) | 80WG-A105 | A3.A3F | 1.18 | pc |
| Pump Pulley | 80WG-010 | HT200 | 7.7 | pc |
| Motor Pulley | 80WG-A203 | HT200 | 10 | pc |
| O-ring | 40X3.1 | NBR | — | pc |
| Pump Casing | 80WGF-002 | ZG1Cr18Ni9Ti | 27 | pc |
| Pump Cover | 80WGF-001 | ZG1Cr18Ni9Ti | 14.5 | pc |
| Impeller X196 | 80WGF-003 | ZG1Cr18Ni9Ti | 6.5 | pc |
| Impeller X170 | 80WGF-003 | ZG1Cr18Ni9Ti | 6.5 | pc |
| Shaft Sleeve | 80WGF-006 | 1Cr18Ni9Ti | 2.42 | pc |
| Stuffing Box | 80WGF-004 | ZG1Cr18Ni9Ti | 11.5 | pc |
| Discharge Pipe | 80WGF-014 | ZG1Cr18Ni9Ti | 13 | pc |
| Seal Ring | 80WGF-007 | 1Cr18Ni9Ti | 1.84 | pc |
| Gland | 80WGF-009 | ZG1Cr18Ni9Ti | 1.3 | pc |
| Packing Ring | 80WGF-008 | 1Cr18Ni9Ti | 0.93 | pc |
| Impeller Nut | 80WGF-011 | 1Cr18Ni9Ti | 0.4 | pc |
| Motor Coupling Half 28 | SBB005A-120-02 | HT200 | 3.6 | pc |
| Pump Coupling Half 30 | SBB005A-120-01 | HT200 | 3.37 | pc |
| Elastic Washer | SBB0051 | Natural Rubber | — | pc |
| Pump Coupling Half 30 | SBB005A-160-01 | HT200 | 5.3 | pc |
| Motor Coupling Half 42 | SBB005A-160-02 | HT200 | 10.1 | pc |
| Motor Coupling Half 48 | SBB005A-160-02 | HT200 | 9.8 | pc |
| Elastic Washer | SBB0052 | Natural Rubber | — | pc |
| Frame Body | SBB007-175-01 | HT200 | 24.5 | pc |
| Rear Bearing Cover | SBB007-175-02 | HT150 | 1.25 | pc |
| Splash Guard Sleeve | SBB007-175-03 | HT150 | 1.1 | pc |
| Front Bearing Cover | SBB007-175-04 | HT150 | 1.25 | pc |
| Grease Guard Ring | SBB007-175-05 | 45 | 1.03 | pc |
Weights are for reference onlyUnit weight varies with material, batch and minor structural changes, For reference only — actual weight per drawing and factory weighing. For exact weights call 13930163303 (WeChat same number) to verify.
Part codes of this model grouped by part name; click any code to see the models it fits.
Send “pump model + part code + material + quantity” for a fast quote. Even a single old part or a nameplate photo is enough — we will identify the part number from the parts book. Common wear parts (impeller, liner, throat bush, frame plate liner, shaft sleeve, stuffing box, expeller cover, expeller) are kept in stock.