25WGF (W/PW Series Sewage Pumps) Parts Listtotal 28 items, 27 part codes, including Impeller 165 (25WGF-003) , Pump Casing (25WGF-001) , Gland (25WGF-007) , Shaft Sleeve (25WGF-006) , Shaft (25WG-004) , Frame Body (SBB007-140-01) etc.; look up the material, unit weight and all fitting models of a part.
It belongs to Sewage & Clean-water Pumps. The table below lists all its parts from the factory parts book; the first items usually replaced are Impeller 165 (25WGF-003) , Pump Casing (25WGF-001) , Gland (25WGF-007) , Shaft Sleeve (25WGF-006) .
The table below lists all parts of this model — part name, part code, material/spec, unit weight and unit. Click a part code to see its materials and every model it fits.
| Part Name | Part Code | Material / Spec | Unit Wt. | Unit |
|---|---|---|---|---|
| Shaft | 25WG-004 | 40Cr | 4.63 | pc |
| Base | 25WG-A101 | HT150 | 24 | pc |
| Base | 25WG-A101a | HT150 | 20 | pc |
| Pump Base | 25WG-A201 | HT150 | 11 | pc |
| Belt Guard | 25WG-A202 | A3.A3F | 2.19 | pc |
| Coupling Guard | 25WG-A102 | A3.A3F | 0.51 | pc |
| O-ring | 35X3.1 | NBR | — | pc |
| Pump Casing | 25WGF-001 | ZG1Cr18Ni9Ti | 14.39 | pc |
| Impeller 165 | 25WGF-003 | ZG1Cr18Ni9Ti | 4.4 | pc |
| Impeller X132 | 25WGF-003B | ZG1Cr18Ni9Ti | 4.5 | pc |
| Shaft Sleeve | 25WGF-006 | 1Cr18Ni9Ti | 1.56 | pc |
| Suction Cone | 25WGFA105 | ZG1Cr18Ni9Ti | 5.57 | pc |
| Shaft-seal Body | 25WGF-002 | ZG1Cr18Ni9Ti | 11.37 | pc |
| Shaft-seal Body | 25WGF-002J | ZG1Cr18Ni9Ti | 12.6 | pc |
| Seal Ring(25WF frame only) | B2106-52 | 1Cr18Ni9Ti | 0.75 | pc |
| Gland | 25WGF-007 | ZG1Cr18Ni9Ti | 0.68 | pc |
| Packing Ring | 25WGF-008 | 1Cr18Ni9Ti | 0.59 | pc |
| Mechanical-seal Gland | 25WGF-005 | ZG1Cr18Ni9Ti | 0.97 | pc |
| Washer | 25WGF | 1Cr18Ni9Ti | 0.02 | pc |
| Pump Coupling Half 20 | SBB005A-95-01 | HT200 | 1.6 | pc |
| Motor Coupling Half 24 | SBB005A-95-02 | HT200 | 2.2 | pc |
| Motor Coupling Half 28 | SBB005A-95-02 | HT200 | 2.2 | pc |
| Elastic Washer | SBB0050 | Natural Rubber | — | pc |
| Frame Body | SBB007-140-01 | HT200 | 12.5 | pc |
| Rear Bearing Cover | SBB007-140-02 | HT150 | 0.7 | pc |
| Splash Guard Sleeve | SBB007-140-03 | HT150 | 0.62 | pc |
| Front Bearing Cover | SBB007-140-04 | HT150 | 0.63 | pc |
| Grease Guard Ring | SBB007-140-05 | 45 | 0.54 | pc |
Weights are for reference onlyUnit weight varies with material, batch and minor structural changes, For reference only — actual weight per drawing and factory weighing. For exact weights call 13930163303 (WeChat same number) to verify.
Part codes of this model grouped by part name; click any code to see the models it fits.
Send “pump model + part code + material + quantity” for a fast quote. Even a single old part or a nameplate photo is enough — we will identify the part number from the parts book. Common wear parts (impeller, liner, throat bush, frame plate liner, shaft sleeve, stuffing box, expeller cover, expeller) are kept in stock.