250WD (W/PW Series Sewage Pumps) Parts Listtotal 36 items, 35 part codes, including Impeller (250WDL004) , Pump Casing (250WDL001) , Pump Cover (250WDL002) , Stuffing Box (250WD-003) , Split Gland (8PWL-0013) , Shaft Sleeve (250WDL-012) etc.; look up the material, unit weight and all fitting models of a part.
It belongs to Sewage & Clean-water Pumps. The table below lists all its parts from the factory parts book; the first items usually replaced are Impeller (250WDL004) , Pump Casing (250WDL001) , Pump Cover (250WDL002) , Stuffing Box (250WD-003) .
The table below lists all parts of this model — part name, part code, material/spec, unit weight and unit. Click a part code to see its materials and every model it fits.
| Part Name | Part Code | Material / Spec | Unit Wt. | Unit |
|---|---|---|---|---|
| Shaft | 250WD-002 | 45 | 97.61 | pc |
| Stuffing Box | 250WD-003 | HT200 | 89 | pc |
| Pump Base | 250WD-001 | HT150 | 154.5 | pc |
| Pump Support | 250WD-004 | HT150 | 36.2 | pc |
| Pump Casing | 250WDL001 | HT200 | 259 | pc |
| Pump Cover | 250WDL002 | HT200 | 172.5 | pc |
| Impeller | 250WDL004 | HT200 | 77.5 | pc |
| Shaft Sleeve | 250WDL-012 | HT200 | 12 | pc |
| Seal Ring | 250WDL-011 | HT200 | 6 | pc |
| Impeller Seal Ring | 250WDL-016 | HT200 | 6 | pc |
| Handhole Cover A | 250WDL-014 | HT150 | 4.2 | pc |
| Handhole Cover B | 250WDL-015 | HT150 | 3.5 | pc |
| Impeller Nut | 250WDL-019 | A3.A3F | 3.52 | pc |
| Rubber Ring | 250WDL-17 | Natural Rubber | — | pc |
| Handhole Clamp | 8PWL-0018 | ZG230-450 | 4 | pc |
| Split Gland | 8PWL-0013 | HT150 | 7 | pc |
| Packing Ring | 8PWL-0021 | HT150 | 4.5 | pc |
| Clamp Screw | 8PWL-0019 | A3.A3F | 0.51 | pc |
| 3/8"Pipe Joint | B3201-03-1 | A3.A3F | 0.16 | pc |
| 3/8"PipeNut | B3201-03-2 | A3.A3F | 0.11 | pc |
| Front Bearing Cover | 4PH-14 | HT150 | 9 | pc |
| Rear Bearing Cover | 4PH-15 | HT150 | 10.3 | pc |
| Oil-hole Cover | 4PH-13 | HT150 | 3.4 | pc |
| Cooling-chamber Cover | 4PH-22 | HT150 | 5.5 | pc |
| frame | 4PH-10 | HT150 | 260 | pc |
| Frame Cover | 4PH-12 | HT150 | 60 | pc |
| Splash Disc | 6PH-18 | HT150 | 2.2 | pc |
| Oil Seal | 80X105X12 | NBR | — | pc |
| Round Internal-tab Lock Washer | B07-68 | A0 | 0.09 | pc |
| Dowel Pin 24 | SBB006-260-3 | 45 | 0.94 | pc |
| Retaining Ring 24 | SBB006-260-5 | A3.A3F | 0.07 | pc |
| Motor Coupling Half 85 | SBB006-260-2 | HT200 | 37.5 | pc |
| Motor Coupling Half 90 | SBB006-260-2 | HT200 | 35.72 | pc |
| Elastic Ring | SBB00624 | Natural Rubber | — | pc |
| Pump Coupling Half 65 | SBB006A-260-01 | HT200 | 29.1 | pc |
| Motor Coupling Half 80 | SBB006A-260-02 | HT200 | 39.05 | pc |
Weights are for reference onlyUnit weight varies with material, batch and minor structural changes, For reference only — actual weight per drawing and factory weighing. For exact weights call 13930163303 (WeChat same number) to verify.
Part codes of this model grouped by part name; click any code to see the models it fits.
Send “pump model + part code + material + quantity” for a fast quote. Even a single old part or a nameplate photo is enough — we will identify the part number from the parts book. Common wear parts (impeller, liner, throat bush, frame plate liner, shaft sleeve, stuffing box, expeller cover, expeller) are kept in stock.