2.5PWL (W/PW Series Sewage Pumps) Parts Listtotal 35 items, 29 part codes, including ImpellerX195 (2.5PW-003) , Pump Casing (2.5PW-001) , Shaft Sleeve (2.5PW-007) , Shaft-seal Box (2.5PW-006) , Bearing Housing (2.5PWL-003) , Seal Ring 90(Bronze) (B2106-90) etc.; look up the material, unit weight and all fitting models of a part.
It belongs to Sewage & Clean-water Pumps. The table below lists all its parts from the factory parts book; the first items usually replaced are ImpellerX195 (2.5PW-003) , Pump Casing (2.5PW-001) , Shaft Sleeve (2.5PW-007) , Shaft-seal Box (2.5PW-006) .
The table below lists all parts of this model — part name, part code, material/spec, unit weight and unit. Click a part code to see its materials and every model it fits.
| Part Name | Part Code | Material / Spec | Unit Wt. | Unit |
|---|---|---|---|---|
| Pump Casing | 2.5PW-001 | HT200 | 18.7 | pc |
| ImpellerX195 | 2.5PW-003 | HT200 | 7 | pc |
| Shaft Sleeve | 2.5PW-007 | HT200 | 0.7 | pc |
| 40Bearing Cover | — | HT200 | 1.5 | pc |
| Suction Bell 80X125 | 2.5PW-009 | HT150 | 21.5 | pc |
| Discharge Bell 70X80 | 2.5PW-010 | HT150 | 8.4 | pc |
| Shaft-seal Box | 2.5PW-006 | HT150 | 1.5 | pc |
| Washer | 2.5PW-008 | HT150 | 0.3 | pc |
| Oil Seal | 40X62X12 | NBR | — | pc |
| Oil Seal | 50X72X12 | NBR | — | pc |
| Impeller X170(Bronze) | 2.5PW-003 | ZCuA110Fe3 | 7 | pc |
| Impeller 160(Bronze) | 2.5PWL-003 | ZCuA110Fe3 | 7 | pc |
| Shaft | 2.5PWL-004 | 45 | 7.91 | pc |
| Drive Shaft | 2.5PWL-trans-002 | 45 | 23.64 | pc |
| Sleeve Bronze | 2.5PW-007 | ZCuA110Fe3 | 0.7 | pc |
| Oil Guard Sleeve | 2.5PWL-005 | HT150 | 1.5 | pc |
| Bearing Housing | 2.5PWL-003 | HT150 | 47 | pc |
| Motor Seat | 2.5PWL-trans-001(Y) | HT150 | 63 | pc |
| Motor Seat | 2.5PWL-trans-001 | HT150 | 63 | pc |
| Gland Cover(A) | 2.5PWL-trans-004 | HT150 | 1.5 | pc |
| Gland Cover(B) | 2.5PWL-trans-005 | HT150 | 1.5 | pc |
| Bearing Cover | 2.5PWL-006 | HT150 | 1.1 | pc |
| Shaft-seal Body | 2.5PWL-002 | HT150 | 13.25 | pc |
| Shaft-seal Box(Bronze) | 2.5PW-006 | ZCuA110Fe3 | 1.5 | pc |
| Seal Ring 90(Bronze) | B2106-90 | ZCuA110Fe3 | 1 | pc |
| Pump Support | 2.5PWL-001 | HT200 | 29.5 | pc |
| Coupling B | 2.5PWL-007 | 35 | 6.83 | pc |
| Coupling A | 2.5PWL-trans-003 | 35 | 4.69 | pc |
| Elbow | 2.5PWL-08 | HT150 | 13 | pc |
| Pin | 2.5PWL-trans-006 | 35 | 0.16 | pc |
| Washer(Bronze) | 2.5PW-008 | ZCuA110Fe3 | 0.3 | pc |
| Pump Coupling Half 35 | SBB005-160-1 | HT200 | 5.1 | pc |
| Motor Coupling Half 38 | SBB005-160-2 | HT200 | 7.4 | pc |
| Motor Coupling Half 42 | SBB005A-160-02 | HT200 | 10.1 | pc |
| Elastic Washer | SBB0052 | Natural Rubber | — | pc |
Weights are for reference onlyUnit weight varies with material, batch and minor structural changes, For reference only — actual weight per drawing and factory weighing. For exact weights call 13930163303 (WeChat same number) to verify.
Part codes of this model grouped by part name; click any code to see the models it fits.
Send “pump model + part code + material + quantity” for a fast quote. Even a single old part or a nameplate photo is enough — we will identify the part number from the parts book. Common wear parts (impeller, liner, throat bush, frame plate liner, shaft sleeve, stuffing box, expeller cover, expeller) are kept in stock.