KWPK300-400 (KW Series Sewage Pumps) Parts Listtotal 52 items, 44 part codes, including Impeller KD2=408 P08 (W222554-00) , Frame Plate Liner P10/400 (J135.05-W224931) , Pump Casing (W223647-15) , Rear Pump Cover P08/400 (J163-W222501-02) , Stuffing Box P08/400 (J451-W223135-03) , Gland P08 (J452-W162609) etc.; look up the material, unit weight and all fitting models of a part.
It belongs to Sewage & Clean-water Pumps. The table below lists all its parts from the factory parts book; the first items usually replaced are Impeller KD2=408 P08 (W222554-00) , Frame Plate Liner P10/400 (J135.05-W224931) , Pump Casing (W223647-15) , Rear Pump Cover P08/400 (J163-W222501-02) .
The table below lists all parts of this model — part name, part code, material/spec, unit weight and unit. Click a part code to see its materials and every model it fits.
| Part Name | Part Code | Material / Spec | Unit Wt. | Unit |
|---|---|---|---|---|
| Pump Casing | W223647-15 | HT250 | 477 | pc |
| Impeller KD2=408 P08 | W222554-00 | HT250 | 57 | pc |
| Impeller KD2=380 P08 | W222554-00 | HT250 | 57 | pc |
| Impeller KD2=350 P08 | W222554-00 | HT250 | 57 | pc |
| Impeller KD2=408 P10 | W224961 | HT250 | 57 | pc |
| Casing Seal Ring | W223658 | HT200 | 13 | pc |
| Support | W140X280/ZN3240 | QT500-7 | 5.5 | pc |
| Frame Plate Liner P10/400 | J135.05-W224931 | HT250 | 56.3 | pc |
| Rear Pump Cover P08/400 | J163-W222501-02 | HT250 | 70.53 | pc |
| Rear Pump Cover P10/400 | J163-W224937-02 | HT250 | 70.53 | pc |
| Inspection Cover 140X45 | J164-W225651 | HT250 | 5.7 | pc |
| Rear Pump Cover V12/630 | J163-W212522 | HT250 | 156.3 | pc |
| Inspection Cover 195X28 | J164-W501866 | HT250 | 13.4 | pc |
| Shaft P10ax | J210-W224926 | 45 | 184.71 | pc |
| Impeller Cap P08 | J260-W226622 | HT200 | 2.18 | pc |
| Connecting Body P10/400 | J344-W162615-10 | HT250 | 74 | pc |
| Stuffing Box P08/400 | J451-W223135-03 | HT250 | 19.45 | pc |
| Gland P08 | J452-W162609 | HT250 | 2.67 | pc |
| Packing Sleeve P08 | J456-W501895-00 | HT200 | 2.87 | pc |
| Lantern Ring P08s | J458-D100/ZN2820 | HT200 | 3.83 | pc |
| Lantern Ring P08s Stainless | J458-D100/ZN2820 | 1Cr18Ni9Ti | 3.08 | pc |
| Gland P10 | J452-W224929 | HT250 | 4.9 | pc |
| Packing Sleeve P10 | J456-W224928-00 | HT200 | 3.19 | pc |
| Lantern Ring P10as | J458-W224951 | HT200 | 4.47 | pc |
| Stuffing Box P10/400 | J451-W224935-03 | HT250 | 35.1 | pc |
| Bearing Shim | J500.23-AN767 | 20 | 2.65 | pc |
| Water Guard Ring | J507-S120/ZN137 | A3.A3F | 2.28 | pc |
| Shaft Sleeve P08 | J524-W226365 | 3Cr13 | 15.78 | pc |
| Shaft Sleeve P10 | J524-W226457 | 3Cr13 | 21.96 | pc |
| Impeller-cap Washer | J550-W226621 | 20 | 2.31 | pc |
| Cross Handle D80 | J576-DIN6335 | HT200 | 0.45 | pc |
| Cross Handle D100 | J576-DIN6335 | HT200 | 0.88 | pc |
| Oil-filler Cap | J672-ZN4234-B20-01 | AL | 0.12 | pc |
| Oil-filler Cover Body | J672-ZN4234-B20-02 | AL | 0.11 | pc |
| Suction Pipe DN300 | J722-W212384 | HT250 | 83.3 | pc |
| Key P10 | J940.01-W224974 | 45 | 0.53 | pc |
| Pipe Plug G1/4" | SBB108-91-01 | A3.A3F | 0.07 | pc |
| Pipe Plug G3/8" | SBB108-91-01 | A3.A3F | 0.1 | pc |
| Pipe Plug G1/2" | SBB108-91-02 | A3.A3F | 0.2 | pc |
| Pipe Plug G1" | SBB108-91-02 | A3.A3F | 0.57 | pc |
| Stud M20X85 | SBB109-91-03 | 35 | 0.33 | pc |
| Stud M20X115 | SBB109-91-03 | 35 | 0.43 | pc |
| Stud M20X125 | SBB109-91-03 | 35 | 0.43 | pc |
| Bolt BM16X70 | SBB113-91-05 | A3.A3F | 0.28 | pc |
| Bolt BM20X95 | SBB113-91-08 | A3.A3F | 0.49 | pc |
| Bearing Housing A | SBB114-08W | HT250 | 157.5 | pc |
| Bearing Cover | SBB115-09W-00 | HT250 | 12.82 | pc |
| Bearing Cover | SBB115-10W-00 | HT250 | 18.39 | pc |
| Packing Guard Ring A100 | SBB116-06 | HT200 | 7.19 | pc |
| Packing Guard Ring A120 | SBB116-07 | HT200 | 10.37 | pc |
| Support | SBB117-18W | QT500-7 | 7.03 | pc |
| Support | SBB117-25W | QT500-7 | — | pc |
Weights are for reference onlyUnit weight varies with material, batch and minor structural changes, For reference only — actual weight per drawing and factory weighing. For exact weights call 13930163303 (WeChat same number) to verify.
Part codes of this model grouped by part name; click any code to see the models it fits.
Send “pump model + part code + material + quantity” for a fast quote. Even a single old part or a nameplate photo is enough — we will identify the part number from the parts book. Common wear parts (impeller, liner, throat bush, frame plate liner, shaft sleeve, stuffing box, expeller cover, expeller) are kept in stock.