KWPS40-250 (KW Series Sewage Pumps) Parts Listtotal 32 items, 30 part codes, including Impeller KD2=260 (W222525-00) , Frame Plate Liner P03/250 (J135.02-W229386) , Pump Casing (W222523-13) , Rear Pump Cover P03/250 (J163-W229375-02) , Stuffing Box P03 (J451-W159226-03) , Gland P03 (J452-W150099) etc.; look up the material, unit weight and all fitting models of a part.
It belongs to Sewage & Clean-water Pumps. The table below lists all its parts from the factory parts book; the first items usually replaced are Impeller KD2=260 (W222525-00) , Frame Plate Liner P03/250 (J135.02-W229386) , Pump Casing (W222523-13) , Rear Pump Cover P03/250 (J163-W229375-02) .
The table below lists all parts of this model — part name, part code, material/spec, unit weight and unit. Click a part code to see its materials and every model it fits.
| Part Name | Part Code | Material / Spec | Unit Wt. | Unit |
|---|---|---|---|---|
| Impeller KD2=260 | W222525-00 | HT250 | 6 | pc |
| Pump Casing | W222523-13 | HT250 | 50 | pc |
| Casing Seal Ring | KWP40-250-01 | HT250 | 0.91 | pc |
| Frame Plate Liner P03/250 | J135.02-W229386 | HT250 | 14 | pc |
| Inspection Cover Φ75X9.5 | J164-W159235 | HT250 | 1.4 | pc |
| Rear Pump Cover P03/250 | J163-W229375-02 | HT250 | 14.6 | pc |
| Shaft P03ax | J210-W212503 | 45 | 13.87 | pc |
| Connecting Body P04/250 | J344-W150084-10 | HT250 | 19.5 | pc |
| Bearing Adjusting Sleeve P03ax | J382-45/120ZN48 | HT250 | 6.5 | pc |
| Stuffing Box P03 | J451-W159226-03 | HT250 | 4.79 | pc |
| Gland P03 | J452-W150099 | ZG230-450 | 0.53 | pc |
| Packing Sleeve P03 | J456-W159229-00 | HT200 | 1.13 | pc |
| Lantern Ring P03 | J458-B45/ZN2820 | HT200 | 0.93 | pc |
| Shaft Sleeve P03 | J524-W159228 | 3Cr13 | 1.8 | pc |
| Cross Handle D50 | J576-DIN6335 | HT200 | 0.14 | pc |
| Oil-filler Cap | J672-ZN4234-B20-01 | AL | 0.12 | pc |
| Oil-filler Cover Body | J672-ZN4234-B20-02 | AL | 0.11 | pc |
| Suction Pipe DN65 | J722-W159234-00 | HT250 | 14.6 | pc |
| Impeller Screw P03 | J906-W500503 | 20 | 0.67 | pc |
| Key P02 | J940.01-W500609 | 45 | — | pc |
| Pipe Plug G1/4" | SBB108-91-01 | A3.A3F | 0.07 | pc |
| Pipe Plug G1/2" | SBB108-91-02 | A3.A3F | 0.2 | pc |
| Pipe Plug G3/4" | SBB108-91-02 | A3.A3F | 1.31 | pc |
| Stud M12X45 | SBB109-91-01 | 35 | 0.06 | pc |
| Stud M12X90 | SBB109-91-01 | 35 | 0.1 | pc |
| Support Washer A90/100X3.5 | SBB112-91-02 | A3.A3F | 0.37 | pc |
| Shim 90/100X0.5 | SBB112-91 | A3.A3F | 0.01 | pc |
| Bolt BM10X60 | SBB113-91-02 | A3.A3F | 0.14 | pc |
| Bearing Housing A | SBB114-04W | HT250 | 19 | pc |
| Bearing Cover | SBB115-03W-00 | HT250 | 2.8 | pc |
| Packing Guard Ring A45 | SBB116-02 | HT200 | 2.02 | pc |
| Support | SBB117-02W | QT500-7 | 1.7 | pc |
Weights are for reference onlyUnit weight varies with material, batch and minor structural changes, For reference only — actual weight per drawing and factory weighing. For exact weights call 13930163303 (WeChat same number) to verify.
Part codes of this model grouped by part name; click any code to see the models it fits.
Send “pump model + part code + material + quantity” for a fast quote. Even a single old part or a nameplate photo is enough — we will identify the part number from the parts book. Common wear parts (impeller, liner, throat bush, frame plate liner, shaft sleeve, stuffing box, expeller cover, expeller) are kept in stock.