KWPK100-250 (KW Series Sewage Pumps) Parts Listtotal 35 items, 34 part codes, including Impeller KD2=260 (W159212-00) , Throat Bush (W159213-00) , Frame Plate Liner P04/250 (J135.02-W229387) , Pump Casing (W159211-20) , Rear Pump Cover P04/250 (J163-W229376-02) , Stuffing Box P04 (J451-W159216-03) etc.; look up the material, unit weight and all fitting models of a part.
It belongs to Sewage & Clean-water Pumps. The table below lists all its parts from the factory parts book; the first items usually replaced are Impeller KD2=260 (W159212-00) , Throat Bush (W159213-00) , Frame Plate Liner P04/250 (J135.02-W229387) , Pump Casing (W159211-20) .
The table below lists all parts of this model — part name, part code, material/spec, unit weight and unit. Click a part code to see its materials and every model it fits.
| Part Name | Part Code | Material / Spec | Unit Wt. | Unit |
|---|---|---|---|---|
| Pump Casing | W159211-20 | HT250 | 61.5 | pc |
| Impeller KD2=260 | W159212-00 | HT250 | 14.5 | pc |
| Throat Bush | W159213-00 | HT250 | 7.5 | pc |
| Packing Compression Ring A55 | ZN65 | 1Cr18Ni9Ti | 2.12 | pc |
| Frame Plate Liner P04/250 | J135.02-W229387 | HT250 | 14 | pc |
| Inspection Cover 115X19.5 | J164-W159239 | HT250 | 3.61 | pc |
| Rear Pump Cover P04/250 | J163-W229376-02 | HT250 | 19 | pc |
| Shaft P04 | J210-W218936 | 45 | 20 | pc |
| Shaft P04ax | J210-W212500 | 45 | 20 | pc |
| Connecting Body P04/250 | J344-W150084-10 | HT250 | 19.5 | pc |
| Bearing Adjusting Sleeve P04ax | J382-55/140ZN48 | HT250 | 7.6 | pc |
| Stuffing Box P04 | J451-W159216-03 | HT250 | 5.5 | pc |
| Gland P04 | J452-W151697 | ZG230-450 | 0.8 | pc |
| Packing Sleeve P04 | J456-W159219-00 | HT200 | 1.41 | pc |
| Lantern Ring P04 | J458-B55/ZN2820 | HT200 | 0.93 | pc |
| Shaft Sleeve P04 | J524-W159218 | 3Cr13 | 2.63 | pc |
| Cross Handle D80 | J576-DIN6335 | HT200 | 0.45 | pc |
| Oil-filler Cap | J672-ZN4234-B20-01 | AL | 0.12 | pc |
| Oil-filler Cover Body | J672-ZN4234-B20-02 | AL | 0.11 | pc |
| Suction Pipe DN125 | J722-W159238 | HT250 | 21.5 | pc |
| Impeller Screw P04 | J906-W500504 | 20 | 1.22 | pc |
| Key P04 | J940.01-W151862 | 45 | 0.14 | pc |
| Pipe Plug G1/8" | SBB108-91-01 | A3.A3F | 0.04 | pc |
| Pipe Plug G1/4" | SBB108-91-01 | A3.A3F | 0.07 | pc |
| Pipe Plug G1" | SBB108-91-02 | A3.A3F | 0.57 | pc |
| Stud M12X90 | SBB109-91-01 | 35 | 0.1 | pc |
| Combined Adjusting Shim A108/120 | SBB112-91 | A3.A3F | 0.19 | pc |
| Bolt BM16X70 | SBB113-91-05 | A3.A3F | 0.28 | pc |
| Bearing Housing A | SBB114-03W | HT250 | 19.5 | pc |
| Bearing Housing A | SBB114-06W | HT250 | 19 | pc |
| Bearing Cover | SBB115-03W-00 | HT250 | 2.8 | pc |
| Bearing Cover | SBB115-04W | HT250 | 2.7 | pc |
| Bearing Cover | SBB115-05W-00 | HT250 | 4 | pc |
| Packing Guard Ring A55 | SBB116-03 | HT200 | 2.47 | pc |
| Support | SBB117-05W | QT500-7 | 2.22 | pc |
Weights are for reference onlyUnit weight varies with material, batch and minor structural changes, For reference only — actual weight per drawing and factory weighing. For exact weights call 13930163303 (WeChat same number) to verify.
Part codes of this model grouped by part name; click any code to see the models it fits.
Send “pump model + part code + material + quantity” for a fast quote. Even a single old part or a nameplate photo is enough — we will identify the part number from the parts book. Common wear parts (impeller, liner, throat bush, frame plate liner, shaft sleeve, stuffing box, expeller cover, expeller) are kept in stock.