KWPL350-630 (KW Series Sewage Pumps) Parts Listtotal 51 items, 41 part codes, including Impeller KD2=630 P12 (W226640-00) , Throat Bush (W227429-00) , Frame Plate Liner P12/630 (J135.02-W212526) , Pump Casing (L350-630-01-00) , Rear Pump Cover V12/630 (J163-W212522-51) , Gland P12 (J452-W501891) etc.; look up the material, unit weight and all fitting models of a part.
It belongs to Sewage & Clean-water Pumps. The table below lists all its parts from the factory parts book; the first items usually replaced are Impeller KD2=630 P12 (W226640-00) , Throat Bush (W227429-00) , Frame Plate Liner P12/630 (J135.02-W212526) , Pump Casing (L350-630-01-00) .
The table below lists all parts of this model — part name, part code, material/spec, unit weight and unit. Click a part code to see its materials and every model it fits.
| Part Name | Part Code | Material / Spec | Unit Wt. | Unit |
|---|---|---|---|---|
| Impeller KD2=630 P12 | W226640-00 | HT250 | 128.5 | pc |
| Throat Bush | W227429-00 | HT250 | 81 | pc |
| Pump Casing | L350-630-01-00 | HT250 | — | pc |
| Suction Elbow | L350-630-02-00 | HT250 | — | pc |
| Key C25X160 | GB1096-7930 | 3Cr13 | — | pc |
| Key 20X12X140 | GB1096-79 | HT250 | 0.62 | pc |
| Frame Plate Liner P12/630 | J135.02-W212526 | HT250 | 142 | pc |
| Inspection Cover 140X30 | J164-W216969 | HT250 | 6.5 | pc |
| Rear Pump Cover V12/630 | J163-W212522-51 | HT250 | — | pc |
| Inspection Cover 195X28 | J164-W501866 | 45 | 13.4 | pc |
| Intermediate Shaft V08 | J212-W502111 | 45 | 122.04 | pc |
| Shaft P12s | J210-W501902 | 45 | 198.48 | pc |
| Drive Shaft V08-900 | J213-W502104 | HT200 | — | pc |
| Impeller Cap P12 | J260-W226322 | HT200 | 2.37 | pc |
| Bearing Seat S(V10,V12) | J330-W950710 | HT250 | 516 | pc |
| Gland P12 | J452-W501891 | HT250 | 4.9 | pc |
| Packing Sleeve P12 | J456-W501894-00 | HT200 | 4.23 | pc |
| Lantern Ring P12s | J458-W501892 | HT200 | 5.28 | pc |
| Bearing Shim | J500.23-AN767 | 20 | 2.65 | pc |
| Water Guard Ring | J507-S120/ZN137 | A3.A3F | 2.28 | pc |
| Shaft Sleeve P12 | J524-W226366 | CS1 | 21.86 | pc |
| Impeller-cap Washer | J550-W226321 | 20 | 3.61 | pc |
| Impeller-cap Washer | J550-W226321 | ATNi15Cu6Cr2 | 3.61 | pc |
| Cross Handle D80 | J576-DIN6335 | HT200 | 0.45 | pc |
| Cross Handle D100 | J576-DIN6335 | HT200 | 0.88 | pc |
| Key 3Cr13 | J940.04-DIN6885 | 3Cr13 | 5.13 | pc |
| Key P12 | J940.01-W501899 | 45 | 0.66 | pc |
| Dowel Pin 30 | SBB006-330-3 | 45 | 1.58 | pc |
| Retaining Ring 30 | SBB006-330-5 | A3.A3F | 0.09 | pc |
| Pump Coupling Half 75 | SBB006A-330-01 | HT200 | 46.64 | pc |
| Motor Coupling Half 95 | SBB006A-330-02 | HT200 | 62.2 | pc |
| Pump Coupling Half 110 | SBB006A-330-01 | HT200 | 49.3 | pc |
| Pipe Plug G3/8" | SBB108-91-01 | A3.A3F | 0.1 | pc |
| Pipe Plug G1/2" | SBB108-91-02 | A3.A3F | 0.2 | pc |
| Pipe Plug G3/4" | SBB108-91-02 | A3.A3F | 1.31 | pc |
| Pipe Plug G5/4" | SBB109-91-03 | A3.A3F | 0.83 | pc |
| Stud M20X115 | SBB109-91-03 | 35 | 0.43 | pc |
| Bearing Seal Cover JV6034 | SBB111-91 | A2.A2F | 0.11 | pc |
| Bearing Seal Cover AV6324 | SBB111-91 | A2.A2F | 0.12 | pc |
| Bearing Seal Cover 200/80 | SBB111-91 | A2.A2F | 0.44 | pc |
| Shim 951 | SBB112-91 | A3.A3F | 0.03 | pc |
| Shim 952 | SBB112-91 | A3.A3F | 0.05 | pc |
| Shim 953 | SBB112-91 | A3.A3F | 0.08 | pc |
| Shim 954 | SBB112-91 | A3.A3F | 0.16 | pc |
| Bolt BM16X80 | SBB113-91-06 | A3.A3F | 0.3 | pc |
| Bolt BM20X95 | SBB113-91-08 | A3.A3F | 0.49 | pc |
| Bearing Cover | SBB115-09W-01 | HT250 | 12.82 | pc |
| Bearing Cover | SBB115-10W-01 | HT250 | 18.39 | pc |
| Packing Guard Ring A140 | SBB116-08 | HT200 | 9.37 | pc |
| Support | SBB117-18W | QT500-7 | 7.03 | pc |
| Shaft(KWPL350-630) | 960830362-01 | 45 | — | pc |
Weights are for reference onlyUnit weight varies with material, batch and minor structural changes, For reference only — actual weight per drawing and factory weighing. For exact weights call 13930163303 (WeChat same number) to verify.
Part codes of this model grouped by part name; click any code to see the models it fits.
Send “pump model + part code + material + quantity” for a fast quote. Even a single old part or a nameplate photo is enough — we will identify the part number from the parts book. Common wear parts (impeller, liner, throat bush, frame plate liner, shaft sleeve, stuffing box, expeller cover, expeller) are kept in stock.