KWPK350-500 (KW Series Sewage Pumps) Parts Listtotal 37 items, 34 part codes, including Impeller KD2=508 P08 (W226409-00) , Throat Bush (W222568-00) , Frame Plate Liner P12/500 (J135.02-W212369) , Pump Casing (W230959-35) , Stuffing Box P12/500 (J451-W212371-03) , Gland P12 (J452-W501891) etc.; look up the material, unit weight and all fitting models of a part.
It belongs to Sewage & Clean-water Pumps. The table below lists all its parts from the factory parts book; the first items usually replaced are Impeller KD2=508 P08 (W226409-00) , Throat Bush (W222568-00) , Frame Plate Liner P12/500 (J135.02-W212369) , Pump Casing (W230959-35) .
The table below lists all parts of this model — part name, part code, material/spec, unit weight and unit. Click a part code to see its materials and every model it fits.
| Part Name | Part Code | Material / Spec | Unit Wt. | Unit |
|---|---|---|---|---|
| Pump Casing | W230959-35 | HT250 | 550 | pc |
| Impeller KD2=508 P08 | W226409-00 | HT250 | 95 | pc |
| Impeller KD2=508 P10 | W226410-00 | HT250 | 95 | pc |
| Impeller KD2=508 P12 | W226411-00 | HT250 | 95 | pc |
| Throat Bush | W222568-00 | HT250 | 39 | pc |
| Frame Plate Liner P12/500 | J135.02-W212369 | HT250 | 91 | pc |
| Inspection Cover 140X46 | J164-W225650 | HT250 | 6.5 | pc |
| Inspection Cover 195X17 | J164-W222522 | HT250 | 10.6 | pc |
| Shaft P12s | J210-W501902 | 45 | 198.48 | pc |
| Impeller Cap P12 | J260-W226322 | HT200 | 2.37 | pc |
| Connecting Body P12/500 | J344-W212145 | HT250 | 95 | pc |
| Gland P12 | J452-W501891 | HT250 | 4.9 | pc |
| Packing Sleeve P12 | J456-W501894-00 | HT200 | 4.23 | pc |
| Lantern Ring P12s | J458-W501892 | HT200 | 5.28 | pc |
| Stuffing Box P12/500 | J451-W212371-03 | HT250 | 29.41 | pc |
| Bearing Shim | J500.23-AN767 | 20 | 2.65 | pc |
| Water Guard Ring | J507-S120/ZN137 | A3.A3F | 2.28 | pc |
| Shaft Sleeve P12 | J524-W226366 | CS1 | 21.86 | pc |
| Impeller-cap Washer | J550-W226321 | 20 | 3.61 | pc |
| Cross Handle D80 | J576-DIN6335 | HT200 | 0.45 | pc |
| Cross Handle D100 | J576-DIN6335 | HT200 | 0.88 | pc |
| Oil-filler Cap | J672-ZN4234-B20-01 | AL | 0.12 | pc |
| Oil-filler Cover Body | J672-ZN4234-B20-02 | AL | 0.11 | pc |
| Key P12 | J940.01-W501899 | 45 | 0.66 | pc |
| Pipe Plug G1/4" | SBB108-91-01 | A3.A3F | 0.07 | pc |
| Pipe Plug G3/8" | SBB108-91-01 | A3.A3F | 0.1 | pc |
| Pipe Plug G1/2" | SBB108-91-02 | A3.A3F | 0.2 | pc |
| Pipe Plug G1" | SBB108-91-02 | A3.A3F | 0.57 | pc |
| Stud M20X85 | SBB109-91-03 | 35 | 0.33 | pc |
| Bolt BM16X70 | SBB113-91-05 | A3.A3F | 0.28 | pc |
| Bolt BM20X95 | SBB113-91-08 | A3.A3F | 0.49 | pc |
| Bearing Housing A | SBB114-08W | HT250 | 157.5 | pc |
| Bearing Cover | SBB115-09W-00 | HT250 | 12.82 | pc |
| Bearing Cover | SBB115-10W-00 | HT250 | 18.39 | pc |
| Packing Guard Ring A140 | SBB116-08 | HT200 | 9.37 | pc |
| Support | SBB117-18W | QT500-7 | 7.03 | pc |
| Support | SBB117-23W | QT500-7 | 8.5 | pc |
Weights are for reference onlyUnit weight varies with material, batch and minor structural changes, For reference only — actual weight per drawing and factory weighing. For exact weights call 13930163303 (WeChat same number) to verify.
Part codes of this model grouped by part name; click any code to see the models it fits.
Send “pump model + part code + material + quantity” for a fast quote. Even a single old part or a nameplate photo is enough — we will identify the part number from the parts book. Common wear parts (impeller, liner, throat bush, frame plate liner, shaft sleeve, stuffing box, expeller cover, expeller) are kept in stock.